User manual
Table Of Contents
- Operating Instructions
- WARNING
- Getting Started
- Radio
- RDS Operation
- CD/MP3/WMA/AAC
- DVD/Video CD
- Playing a Disc
- Searching by Programme
- Searching by Playlist
- Stopping Playback (Pre Stop)
- Stopping Playback
- Fast-forwarding/Fast-reversing
- Finding the Beginnings of Chapters/Tracks/Files
- Playing Still Frames (Pausing)
- Forward/reverse frame-by-frame Playback
- Slow Motion Playback
- Selecting Programme (SKIP)
- Selecting Playlist (SKIP)
- Selecting Folders
- Repeat Playback
- Searching by Title/Group/Program/playlist/Folder Number
- Searching Directly by Chapter, Track or File Number
- Switching the Angle
- Scroll to Move the Page Forward or Backward
- Switching the Audio Tracks
- Switching the Subtitles (Subtitle Language)
- Switching from the disc menu
- About DivX®
- Other Useful Features
- Setup
- DVD Setup
- DVD Setup Operation
- Changing the language setting
- Setting of the Menu Language
- Setting of the Audio Language
- Setting of the Subtitle Language
- Changing the Country Code Setting
- Setting the Rating Level (Parental Lock)
- Changing the Digital Output Setting
- Setting the Downmix Mode
- Setting the TV Screen
- Setting of the Bonus Code
- Setting the DVD-Audio Playback Mode
- Playing MP3/WMA/AAC Data (File Play Mode)
- Setting the compressed File Playback Data
- Displaying DivX® Disc Information
- Setting the Video CD Play Mode
- DVD Setup Operation
- Source Setup
- Display Setup
- Visual EQ™
- General Setup
- System Setup
- System Setup Operation
- Setting the External Device Interrupt Mode
- Setting the Interrupt Icon Display
- Switching the function of the remote sensor
- Setting the Rear Camera Input
- Setting the Navigation Mode
- Setting the Navigation Interruption
- Setting the AUX Mode
- Setting the Picture/Sound Output
- Setting the BLUETOOTH Connection (BLUETOOTH IN)
- Setting the Digital Output
- Setting the AUX+ Mode
- Setting the AUX+ Level
- Changing the Lighting Colour of Buttons
- System Setup Operation
- DVD Setup
- IMPRINT Operation (Optional)
- Changing MultEQ mode
- Adjusting Sound Setting in Manual Mode
- Setting the MX Level (Media Xpander)
- Adjusting the Crossover Settings (X-Over)
- Adjusting the Time Correction (Time Correction)
- Setting the Time Correction Unit (T.Corr Parameter)
- Graphic Equalizer Adjustments (G-EQ)
- Adjusting the Parametric Equalizer Curve (P-EQ)
- Equalizer Presets (F-EQ)
- Setting the Response Slope for the High Range Speaker (TW Setup)
- Storing Settings in the Memory
- Calling up the Preset Memory
- About Time Correction
- About the Crossover
- External Audio Processor Operation (Optional)
- Adjustment Procedure for Dolby Surround
- Setting the External Audio Processor
- Set MX Mode of the External Audio Processor
- Setting Bass Sound Control
- Using the Pro Logic II Mode
- X-OVER Adjustment
- Performing Time Correction Manually (Time Correction)
- Phase Switching
- Graphic Equalizer Adjustments
- Parametric Equalizer Adjustments
- Setting the Speakers
- Setting of Dolby Digital
- Speaker Setup
- Adjusting the DVD Level
- Linear PCM Setting
- Storing Settings in the Memory
- Calling up the Preset Memory
- BLUETOOTH Operation (Optional)
- Rearview Camera Operation (Optional)
- Navigation System (Optional)
- Auxiliary Device (Optional)
- TUE-T200DVB Operation (Optional)
- Changer (Optional)
- USB Memory/Portable audio player (Optional)
- iPod/iPhone (Optional)
- About Sub Display
- Information
- Installation and Connections
9-EN
Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs
• This unit is compatible with discs recorded in the standard DVD-
Video and DVD-VR (DVD-R/DVD-RW only) formats.
• Note that discs not finalized (processed to enable to play on
playback-only DVD players) cannot be played on this DVD
player.
• Some discs may not play back, depending on the recording
device and disc format.
• Discs or files utilizing copy protection, may not be playable.
Some recording systems may not properly format copied files to
enable proper playback.
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular discs,
flawed discs, dirty discs, when the pickup lens of this DVD
player is dirty, or when moisture condensation has occurred
inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs/DVD+Rs/
DVD+RWs are more affected by heat, moisture, and direct
sunlight. If left in a car, etc., damage may occur and it might not
play on this unit.
• The operable temperature range for disc playback is as follows:
DVD-R/DVD-RW: -25 ~ +70°C
DVD+R/DVD+RW: +5 ~ +55°C
Disc terminology
Title
If titles are programmed for the DVD, these are the largest units of
division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
Protecting the USB connector
• Only an iPod/iPhone, USB memory or Portable audio player can
be connected to the USB connector on this unit. Correct
performance using other USB products cannot be guaranteed.
• If the USB connector is used, be sure to use only the supplied
connector cable with the unit. A USB hub is not supported.
• Depending on the connected USB memory device, the unit may
not function or some functions may not be performed.
• The audio file format that can be played back on the unit is
MP3/WMA/AAC.
• Artist/song name, etc., can be displayed, however characters
may not be correctly displayed.
On Handling USB Memory
• This unit can control a memory storage device that supports the
USB Mass Storage Class (MSC) protocol. Playable audio file
formats are MP3, WMA and AAC.
• USB memory function is not guaranteed. Use USB memory
according to the terms of agreement. Read the USB memory
Owner’s Manual thoroughly.
• Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high
temperatures.
Anywhere the possibility of high humidity or corrosive
substances are present.
• Fix the USB memory in a location where driver operation will
not be hindered.
• USB memory may not function correctly at high or low
temperature.
• Use only certified USB memory. Note that even certified USB
memory, may not function correctly depending on its type or
state.
• Depending on the settings of the USB memory type, memory
state or encoding software, the unit may not play back or display
properly.
• Files protected by DRM (Digital Rights Management), cannot be
played back on this unit. These include AAC formatted files
purchased from the iTunes Store and WMA or other files with
some form of copyright protection.
• USB memory may take time to start playback. If there is a
particular file other than audio in the USB memory, it may take
considerable time before the file is played back or searched.
• The unit can play back “mp3”, “wma” or “m4a” file extensions.
• Do not add the above extensions to a file other than audio data.
This non-audio data will not be recognized. The resulting
playback may contain noise that can damage speakers and/or
amplifiers.
• It is recommended to back up important data on a personal
computer.
• Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove the
USB device to prevent possible damage to its memory.
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data, etc.,
is lost while using this product.










