User manual

49-EN
01GB05INE-W970BT.fm
ALPINE INE-W970BT 68-25285Z06-A (EN)
EN
DE
IT
FR
ES
SE
NL
PL
RU
GR
Adjusting guides simultaneously
Touch [Link].
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
Turning guide display ON/OFF
Turning the selected guide off.
1 Touch [ON/OFF].
The currently selected guide will turn off.
2 To turn the guide on, touch [ON/OFF] again.
• Guides that are turned off are still adjustable.
Returning guides to default.
1 Touch [Default].
A message window will appear.
2 Touch [OK].
Adjusted values will return to default settings.
Camera Interrupt Setting (Power OFF
Mode)
[Camera Interrupt] is selected on the Camera setup menu in step 3.
Refer to “Camera Setup Operation” (page 48).
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.
Setting item: Camera Interrupt (Power OFF Mode)
Setting contents: On (Initial setting) /Off
On: The rear camera image is displayed
Off: The rear camera image is not displayed
01GB00INE-W970BT.book Page 49 Sunday, February 10, 2013 4:43 PM