User manual

55-EN
Operations During a Conversation
Display example
Name, Phone number, Type*
* Depending on the model, Type may not be displayed.
Conversation time
You can adjust the transmit volume and receive volume respectively.
Touch [] or [] for “Vol.”
You can adjust the volume in 11 levels.
Touch [] to turn down the volume. Touch [] to turn up the
volume.
The voice output for calls is switchable between car speakers and the
mobile phone speaker.
Touch [].
• Depending on the mobile phone, this operation may not be possible.
Transmits a DTMF (Touch-Tone) during a call.
1 Touch [Keypad].
The number input screen appears.
2 Input number.
• You can transmit a Touch-Tone signal during a call.
You can temporarily lower the microphone level to 0.
Touch [] during a conversation.
During the mute mode, is highlighted. Touch [] again
to cancel the mute mode.
Phone Book Function
Display example for Phone Book screen
An icon is displayed to indicate that multiple phone
numbers are registered under an entry.
You can synchronize the system’s phone book with the mobile phone’s
phone book.
1 Press the (Phone) button.
The phone menu screen is displayed.
2 Touch [].
3 Touch [Download].
4 Touch [SYNC].
Synchronization of the phone books starts.
• You can store up to 1,000 phone numbers in the phone book.
• You can store up to 3 phone numbers by one person’s name.
1 Press the (Phone) button.
The phone menu screen is displayed.
2 Touch [].
3 Touch [Download].
4 Touch [Add].
Stays on standby for connection of the mobile phone.
• Touch [Cancel] to cancel the standby mode.
5 The mobile phone accesses this unit and then
transfers the phone book from the mobile phone to
this unit.
Adjusting the Speech Volume
:Microphone Level
:Caller Volume
Changing the Voice Output
DTMF (Touch-Tone) Function
Muting the Speech Volume
Synchronizing the Phone Book
Adding the Phone Book