User manual

59-EN
01GB05INE-W925R.fm
ALPINE INE-W925R 68-21057Z82-A (EN)
Adjusting the Calling Volume
[Calling Volume] is selected on the BLUETOOTH setup menu in step
3.
Refer to “BLUETOOTH Setup Operation” (page 56).
You can adjust the receive volume, during the call.
Setting item: Calling Volume
Setting contents: 1 to 11 (Initial setting: 5)
Deleting All the Histories
[Delete Call History] is selected on the BLUETOOTH setup menu in
step 3. Refer to “BLUETOOTH Setup Operation” (page 56).
Dialled/Received/Missed Incoming histories are all deleted.
Setting item: Delete Call History
1 Touch [Delete Call History]
The confirmation screen is displayed.
• When there is no history, this option is not available.
2 Touch [OK].
All the histories are deleted.
Camera Setup Operation
With an optional camera connected, its video is output to the monitor.
When the camera is connected, set this item.
1 Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2 Touch [ (CAMERA)].
The Camera Setup screen appears.
3 Select the desired item.
Setting items: Direct Camera / AUX Camera* / Camera Interrupt
(Power OFF Mode)
4 Touch [] or [] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [] to
close the window after setting.
5 Touch [] to return to the previous screen.
• Immediately after changing the Camera Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 25).
Camera Setup
The parking brake must be engaged to access the Setup screen.
Attempting to access this screen while driving will display the
warning-Unable to operate while driving.
The following steps 1 to 5 are common operations to each
“Setting item” of Camera Setup. Refer to each section for
details.
01GB00INE-W925R.book Page 59 Tuesday, July 17, 2012 2:17 PM