User manual

45-EN
01GB05INE-W925R.fm
ALPINE INE-W925R 68-21057Z82-A (EN)
Displaying the Deregistration Code
1 Touch [Warranty/Copyright Info.].
2 Touch [DivX(R) VOD].
3 Touch [Deregistration].
The confirmation dialog screen appears.
4 Touch [OK].
The deregistration code is displayed on the screen.
• When you have finished, touch [Cancel]. If you want to continue and
display a new registration code, touch [OK], check the registration
code, and then touch [OK] again.
You can initialise all data, to restore the factory settings. Remove the
CD/DVD disc, etc. from the system before operation
Setting item: Restore Factory Setting
1 Touch [Restore Factory Setting].
2 After the confirmation message appears, touch
[OK].
The confirmation screen appears again.
3 Touch [OK].
The system starts initialisation.
• Do not turn on/off the power or change the ignition key position until
system restart is completed.
• Do not detach the front panel by pressing the (Release) button
until system restart is complete.
Installation Setup
[Installation] is selected on the General setup menu in step 3. See
“General Setup Operation” (page 41).
Setting item: Installation
The Installation check screen is displayed.
Sound Setup Operation
1 Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2 Touch [Sound].
The Sound Setup screen appears.
3 Select the desired item.
Setting items: Balance / Fader / Subwoofer / Media Xpander /
Bass Max EQ / Parametric EQ / Time Correction /
X-OVER / Defeat / Volume / Application Volume
Setup
4 Touch [] or [] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [] to
close the window after setting.
5 Touch [] to return to the previous screen.
• Immediately after changing the Sound Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to “Selecting an
Item in a List” (page 25).
Initialising the System
Sound Setup
The parking brake must be engaged to access the Setup screen.
Attempting to access this screen while driving will display the
warning-Unable to operate while driving.
The following steps 1 to 5 are common operations to each
“Setting item” of Sound Setup. Refer to each section for details.
01GB00INE-W925R.book Page 45 Tuesday, July 17, 2012 2:17 PM