Quick Start

ALPINE iLX-F905D 68-41657Z79-B_QRG (EN) ALPINE iLX-F905D 68-41657Z79-B_QRG (EN)
12-EN
Owner’s manual Bluetooth Setup, Bluetooth Operation
Hands-Free Phone Control
The unit can connect with up to two hands-free phones.
How to connect to a Bluetooth
compatible device (Pairing)
To display the Setup HOME screen:
• Bring your vehicle to a complete stop at a safe location.
Engage the parking brake.
1 Touch [Setup] on the HOME screen.
2 Touch [Device].
3 Touch [Device List].
4 Touch [Add New Device] to search for a new
device.
The Select Function screen is displayed.
5 Select the function of the connecting
device on the Select Function screen, and
touch [OK].
A check mark is displayed for the selected function.
• Hands Free1: The device is used as the first
hands-free phone.
• Hands Free2: The device is used as the second
hands-free phone.
• Bluetooth Audio: The device is used as an
Bluetooth Audio device.
• Apple CarPlay*: The device is used as Apple
CarPlay.
* If you want to use Apple CarPlay mode without
displaying [Apple CarPlay] on the Select Function
screen, select [Hands Free1] or [Hands Free2] to
connect your device.
6 When a code is displayed on the device,
check that the code is the same as the one
on the screen of the unit, and touch [Yes].
7 When the device connection is complete, a
message appears and the device returns to
normal mode.
• You can register up to 10 Bluetooth compatible mobile
phones.
Answering a Call
1 An incoming call triggers the ringtone and
an incoming call display.
2 Touch [ ].
The call starts.
Hanging up the Telephone
1 Touch [ ] (End Call).
The call finishes.
Owner’s manual Installation
Installation
Note on installation
• Install at an angle between horizontal and 30°.
Note that installing at an angle outside of this
range will result in a loss of performance and
possible damage.
<iLX-705D>
0 - 30°
<iLX-F905D/iLX-F115D>
0 - 30°
• Do not block the unit’s heat sink, which would
prevent air circulation. If blocked, heat will
accumulate inside the unit and may cause a fire.
Air ventilation hole
Rear of the Unit
• When installing the display unit and main unit, do
not touch the connectors with your hands.
(iLX-F905D/iLX-F115D only)
Connectors
<Main unit><Display unit>