User manual

63-EN
Function Screen example
■
Climate screen example
You can control the temperature inside the vehicle, etc.
■
Parking sensor screen example
You can check the distance from the front and rear of the
vehicle to an obstacle.
• If the car sensor detects an obstacle, the screen automatically
changes to the Parking sensor screen. For details, see “About
Parking Sensor screen” (page 63).
About Parking Sensor screen
The Parking sensor screen turns on when the front or rear
sensor on your vehicle detects an obstacle within a certain
distance.
Parking Sensor Full screen example
When the front or rear sensor detects an obstacle within a
certain distance, the Parking Sensor screen is displayed, and
the indicator that corresponds with that area lights up.
Indicator colors when an obstacle is detected.
Red: close distance
Orange: medium distance
Yellow: long distance
• Depending on the speed of the vehicle, when moving faster
than a certain speed, the Parking Sensor screen may not be
displayed.
• Vehicles that do not have the obstacle detection sensor cannot
use this function.
Parking Sensor Camera interlock screen example
(Rear camera)
You can check for obstacles through an interlocked camera
image by connecting a Camera.
• Touch the car icon to switch to the Parking sensor full screen.
(Tou ch [Back] on the Parking Sensor full screen to return to
the Parking Sensor Camera interlock display.)
• Touch the Camera image area to switch to the Camera full
screen.
(While displaying the Camera full screen, touch the Camera
screen, then touch [
] to return to the Parking Sensor
Camera interlock screen.)
• Touch the car icon to switch to the Parking sensor full screen.
(Touch [
] on the Parking Sensor full screen to return to
the Parking Sensor Camera interlock display.)
About Car Setting screen
In the car setting screen, you can make the settings that you
would usually find in the factory radio. Some CAN interfaces
have additional settings, those can be also accessed from
the Car Setting screen.
Car Setting screen example
Select from the list menu the function you want to set. For
details of the settings see the owner’s manual of the vehicle
or the CAN interface.