User manual

38-EN
Radio/RDS
■
RDS (FM1/FM2/FM3) main screen example
TP/EON indicator
Switch the DAB band.
Switch the FM band.
Switch the AM band.
Information display
• For details on switching the display of the Radio text,
see “Displaying Radio Text” (page 40).
Increases frequency
Touch and hold to change the frequency continuously.
Displays the Radio Setup Menu screen (page
18).
Decreases frequency
Touch and hold to change the frequency continuously.
Traffic Information mode On/Off
Memorizes stations automatically
Switches a Seek mode.
Preset List
Displays the preset stations with a short touch.
Touch for at least 2 seconds to memorize the current
station as a preset station.
Radio Basic Operation
Listening to the Radio
1 Press the (HOME) button and select radio
mode.
The display shows the radio mode screen.
2 Touch [FM ] or [AM ] to select a band.
Each touch changes the bands as follows:
FM1
FM2 FM3 FM1
AM1
AM2 AM1
• For [DAB
], see “DAB/DAB+” (page 40).
3 Touch [ ] repeatedly to select the tuning
mode.
The radio frequency up or down button changes
depending on the tuning mode.
Seek mode: Both strong and weak stations
will be tuned in.
Manual mode: The frequency is manually
tuned in steps.
PTY mode:
(RDS FM Radio Mode
only)
The currently selected
program type station will be
tuned.
Preset mode: You can directly switch preset
stations.
4 Touch [ ], [ ] to change the radio frequency
up or down respectively.
In Manual mode, touch and hold to change the
frequency continuously.
• The
, buttons provide the same functions
above.
Presetting Stations Manually
1 Tune in a desired radio station you wish to
store in the preset memory by manual or
automatic seek tuning.
2 Touch and hold the preset button you want to
store for at least 2 seconds.
The selected station is stored.
3 Repeat the procedure to store up to 11 other
stations onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 60 stations can be stored in the preset
memory
(12 stations for each band; FM1, FM2, FM3, AM1 or
AM2).
• If a preset memory has already been set in the preset button, it
will be cleared and the new station will be memorized.