User's Manual

78-EN
iPhone, Smartphone, etc.
The output of your electronic device will be mirrored on this unit
through the HDMI connector. Control from this unit is not possible.
• The electronic device must possess an HDMI output interface.
• Not all devices with an HDMI output interface can be recognized by
this unit.
• Use only the Alpine Special HDMI connection cable.
1 Press the (AUDIO) button to select HDMI mode.
The display shows the HDMI mode screen.
• You can select and change the source in the Menu screen (page 21)
or Favorite screen (page 24).
2 In HDMI player mode, the screen of the device displays
the content of electronic equipment by mirror image.
You can select Display Mode.
For details, see “Switching Display Modes (During Video File Play
Back)” (page 60).
Switching the source when two HDMI devices are connected
You can switch the source only when you have connected the HDMI
selector and “Setting the HDMI selector On/Off ” is set to “On.”
Screen example when the HDMI Setup is “HDMI 1”
Touch [ ] (HDMI 2).
The HDMI source changes to HDMI 2, and the Function button
changes to [ ] (HDMI 1).
Each time you touch [ ] (HDMI 1)* or [ ] (HDMI 2), the HDMI
source changes.
* When HDMI Setup is “DVD,” the Function button is changed to [ ]
(DVD).
HDMI Operation

