Full Product Manual

5. Plug the pump and light cord into your local power

supply. Make sure that there is no water around

the plug & always keep the power source in a dry

place.

6. You can now adjust the water pump to your flow

preference. (see Quick Tip #1) Once set, install the

Back Door Cover by sliding it into the designated

opening.

7. Congratulations, your fountain is now complete.

Don’t forget to add water regularly as water will

evaporate over time.

Relax and enjoy your new fountain.

Alpine Quick Tip #3

Make sure your pump

and light cords are

tucked neatly into the

cord slot.