Full Product Manual

Unpack all components carefully. Please check to
ensure all parts have been removed from the
packaging. *Some splashing may occur when the
product is in use.
1. Place the fountain base on a smooth & level
surface. Allow enough space to access the pump.
2. Remove the pump from its packaging and adjust
the flow control to the lowest setting to avoid
splashing until the fountain is completely
assembled.
• Always unplug the pump from the
electrical outlet before cleaning &
handling
• Use with clean water only, do not place
the fountain and/or parts in any other
liquid.
• Periodically change water & clean the
pump to keep free from microorganisms
• Disconnect and store the unit in a dry
place if not in use for an extended period
of time, or during freezing weather.
• Do not operate the fountain in
temperatures below 41° F / 5° C.
• Do not operate with water above 90°F /
30°C.
• Do not lift, carry or pull the pump by the
power cord.
• Do not exceed the maximum voltage &
wattage on transformer.
• NEVER LET THE PUMP RUN DRY.
CAUTION
Alpine Quick Tip #1
Slide to the Left to turn up
the water flow. Slide the
adjuster to the Right to
turn down the water flow.
ASSEMBLING & USING YOUR PRODUCT
4
9