Full Product Manual

Assembling & Using Your Product

Unpack all components carefully. Please check to ensure all parts have been

removed from the packaging. Decide on a suitable location to begin assembling,

bearing in mind there may be some splashing when the product is in use.

Components:

A Bird Figurine (1)

B Birdbath Basin (1)

C Birdbath Leg (1)

D Bottom Leg Connector (1)

E Birdbath Base (1)

Assembling:

1. Connect the birdbath Leg (C) and the bottom leg connector (D) together

by screwing clockwise (See diagram on page 2).

2. Connect the birdbath base (E) and the bottom leg connector (D)

together by screwing clockwise (See diagram on page 2).

3. Connect the birdbath basin (B) to the top of the birdbath leg (C) by

screwing clockwise (See diagram on page 2).

4. Insert the bird figurine (A) into the hole located on the rim of the birdbath

basin (B) (See diagram on page 2).

Your birdbath is ready for use! Add 3.2 L of water on the birdbath basin

(B)

 NOTE: We recommend that you fill the leg (C) and (D) with sand to increase

stability.

Please refer to the diagram below during assembly.