Manualshelf

Use and Care Manual

ManualsBrandsAlpine Corporation ManualsOutdoor Benches46 in. L 2-Person White/Multi-Color Metal and Wooden Indoor/Outdoor Garden Bench
12
Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have
been removed from the packaging.
Components:
Assembly:
Fit the two bolts on the bottom on the Seat (A) into the tabs at the
center bar of the Left Side Panel (B). Insert the two bolts on the left
side of the seat with the two upper tabs at the back of the side panel
and middle tab on the front Left Side Panel (B). Place Cap Nuts (E)
on two bolts and tighten securely with the Wrench (F).
Repeat the process with the Right Side Panel (C) on the right end of
the Seat (A).
Align the bolts on the back corners of the Backrest (D) with the two tabs
at the tops of the Left Side Panel (B) and Right Side Panel (C). Place a
Cap Nut (D) on each bolt and tighten securely with the Wrench (E).
Congratulations. Your bench is now completely assembled.
Place it in a relaxing setting and enjoy!
Troubleshooting
If you have any questions or problems, please contact the retail store
where you purchased this Daisy Bench.
1
2
B
Left Side
Panel
1x
F
Wrench
1x
2
1
E
Cap Nuts
8x
3
2
2
1
1
A
(Shown from Bottom)
B
C
B
A
1
Insert bolt on Seat (A) into
tab on Left Side Panel (B).
Secure with
Cap Nut (E).
A
Seat
1x
D
Backrest
1x
3
C
B
D
3
Shown from Front
Shown from Back
Insert bolts on Backrest (D)
into tabs on Side Panels.
Secure with
Cap Nuts (E).