Use and Care Manual

Assembling & Using Your Product

Unpack all components carefully.

Please check to ensure all parts have been removed from the

packaging.

Components & Hardware:

• Bench

• 2 Arm rest

• Support Rod

• 1 Wrench

• 8 Nuts

Assembling & Using Your Product

Assembly:

Step 1: First open the bench completely outward by pulling seat

away from backrest. (See diagram above Step 1)

Step 2: Attach one of the arm rest to the right side of the bench,

by using 3 nuts at the A, B, C points. Tighten each nut clockwise

with the provided wrench. (See diagram above Step 2)

Step 3: Attach the other arm rest to the left side of the bench, by

using 3 nuts at the A, B, C points. Tighten each nut clockwise

with the provided wrench. (See diagram above Step 3)

Step 4: Take the support rod and attach it to the bottom back

rail of each arm rest. Secure the rod in place using 1 nut on

each side, tighten it clockwise with the provided wrench.

(See diagram above Step 4)