Full Product Manual

9. Plug the pump and light cord into your local
power supply. Make sure that there is no water
around the plug & always keep the power
source in a dry place.
10. Finally add Rocks to your Fountain Tray and
enjoy your new Fountain. Don’t forget to add
water regularly as water will evaporate over
time.
• Submersible Stream Pump ………….PAD900
• Replaceable Transformer……….….....PL022T
• Replacement Light Bulb………………RBS1210
• Fountain Care Formula…………….....PPL102
Foam and scale remover for indoor and outdoor fountains.
3. Remove the pump from its packaging and adjust
the flow control to the lowest setting to avoid
splashing until the fountain is completely
assembled.
4. Place the Pump and Pump Valve into the
Fountain Base. Connect the Pump to the Valve
first, then connect the Valve to the PVC connector
of the Fountain Top.
5
REPLACEMENT PART ITEM#
Alpine Quick Tip #1
Turn to the Left / Counter-
Clockwise to turn down
the water flow. Turn the
adjuster to the Right /
Clockwise to turn up the
water flow.
8
ALSO AVAILABLE FROM ALPINE
1 2