Purchased your product online? We would really appreciate it if you can share your experience with others by reviewing our product on the website from which you purchased. Owner’s Manual Item # MLT100 Bronze Mirror Waterfall Fountain with Decorative Stones and Halogen Light Have Questions or Issues? Need help with assembly? Contact us and we will resolve them within 12 hours. Support Hours: M-F 7:30–5:00 (U.S. Pacific Time) Call: 877-460-4511 Email: info@alpine4u.com V8.
MAINTENANCE If the water does not flow through the top panel after several minutes 1. Adjust the water flow with the Red Lever on the Valve inside of the Fountain Base. 2. If the problem persists, remove the top cover from the Fountain Top. Using the Cloth or Brush provided, clean the stainless steel barrier back & forth until the desired flow effect is achieved. 3.
WHAT’S INCLUDED Fountain Tray with Light 1x Fountain Top 1x Pump Valve 1x Fountain Base 1x Transformer 1x LIMITED WARRANTY INFORMATION Replacement Light 1x Fountain Pump 1x Sponge 1x Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials.
9. Plug the pump and light cord into your local power supply. Make sure that there is no water around the plug & always keep the power source in a dry place. 3. Remove the pump from its packaging and adjust the flow control to the lowest setting to avoid splashing until the fountain is completely assembled. Alpine Quick Tip #1 Turn to the Left / CounterClockwise to turn down the water flow. Turn the adjuster to the Right / Clockwise to turn up the water flow. 10.
5. Next place the supplied Sponge under the Pump. This will help the Pump from excess vibration in the Fountain Base. 6. Place the Fountain Tray onto the Fountain Base, and route the light cord through the Hole in the Tray then into the Base. Next Route both the Pump and Light cords through the hole in the back of the Fountain. 6 7. Pull out the light cord plug through the back opening & connect to the transformer. 8.
ASSEMBLING & USING YOUR PRODUCT Unpack all components carefully. Please check to ensure all parts have been removed from the packaging. *Some splashing may occur when the product is in use. 1. Place the fountain base on a smooth & level surface. Allow enough space to access the pump. Place the Fountain Top into the Fountain Base with the mirror facing forward. ⚠ CAUTION: It’s important to lean the fountain up against a wall until filled with water, or the fountain will tip over. 2.
CAUTION FEATURES • Relaxing water flow. • • Always unplug the pump from the electrical outlet before cleaning & handling • Use with clean water only, do not place the fountain and/or parts in any other liquid. • Periodically change water & clean the pump to keep free from microorganisms • Disconnect and store the unit in a dry place if not in use for an extended period of time, or during freezing weather. • Do not operate the fountain in temperatures below 41° F / 5° C.
