Full Product Manual

Unpack all components carefully. Please check to

ensure all parts have been removed from the

packaging.

1. Place the front legs on the outer edges of the base

and attach an H2 (30mm) screw just above each

axle hole from the inside of the Base.

2. Now attach the Rear Legs to the opposite end of

the Base by using an H2 (30mm) screw on each

side. The notched section of the Rear legs should

be facing up.

3. Insert the Axle into the Front Legs. It should pass

through both Front Legs.

4. Add the Wheels by placing one on each end of the

axle and securing with an H3 (60mm) Screw on

each end of the axle.

ASSEMBLING & USING YOUR PRODUCT