Full Product Manual

ManualsBrandsAlpine Corporation ManualsGarden Center59 in. Wooden 4-Tier Plant Display Stand with Chalkboard and Wheels

Wooden Cart Plant / Display

Stand with

Chalkboard

Have Questions or Issues? Need help with assembly?

Support Hours: M-F 7:30–5:00 (U.S. Pacific Time)

Owner’s Manual

Item # MBB100

V6.0

Call:

877-460-4511

Email:

info@alpine4u.com

Purchased your product online?

We would really appreciate it if you can share your experience

with others by reviewing our product on the website from

which you purchased.

Summary of content (6 pages)

PAGE 1
Purchased your product online? We would really appreciate it if you can share your experience with others by reviewing our product on the website from which you purchased. Owner’s Manual Item # MBB100 Wooden Cart Plant / Display Stand with Chalkboard Have Questions or Issues? Need help with assembly? Contact us and we will resolve them within 12 hours. Support Hours: M-F 7:30–5:00 (U.S. Pacific Time) Call: 877-460-4511 Email: info@alpine4u.com V6.
PAGE 2
PAGE 3
LIMITED WARRANTY INFORMATION Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials. In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided.
PAGE 4
7. Finally add the Handles by inserting four H1 (25mm) Screws through the handle into the top tier of the display. WHAT’S INCLUDED H1 X 4 Wheels x2 4-Tier Display x1 Chalkboard x1 8. Congratulations, your 4-Tier Display Planter is now complete. Base Support Handles x1 x2 Front Legs x2 Axle x1 ALSO AVAILABLE FROM ALPINE • Americana® UV Acrylic Sealer ...……RRR106 Provides protective clear coating for all painted surfaces.
PAGE 5
ASSEMBLING & USING YOUR PRODUCT Unpack all components carefully. Please check to ensure all parts have been removed from the packaging. 3. Insert the Axle into the Front Legs. It should pass through both Front Legs. 1. Place the front legs on the outer edges of the base and attach an H2 (30mm) screw just above each axle hole from the inside of the Base. 2. Now attach the Rear Legs to the opposite end of the Base by using an H2 (30mm) screw on each side.
PAGE 6
5. Take the 4-Tier Display and align it with the top of the Front and Rear Legs. The Display should rest in the Rear Leg notches. Attach with two H2 (30mm) Screws per leg. Alpine Quick Tip FEATURES Chalkboard for easy messaging • Start each screw by hand. Once aligned, tighten each screw tight. Make sure to tighten them on a smooth level surface. 6. Attach the Chalkboard by inserting four H2 (30mm) Screws through the top tier of the Display.