Instructions / Assembly

Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have been
removed from the packaging.
Step 1: Place the topper (A) on a leveled surface. Take one leg (B) and using 2
screws (D) assemble to table topper (A), tighten with wrench (E). Repeat this
step with the other 3 legs (B), as shown on diagram above.
Step 2: Take the circle base (C) and place on the middle between the legs, use
one screw (D) to attach to each leg (B). See diagram above.
Step 3: Your table is ready to use, put the table on its 4 legs.