Full Product Manual

Unpack all components carefully. Please check to

ensure all parts have been removed from the

packaging.

1. Start with the Backrest and seat by unfolding to a

seating position.

2. Using the supplied Acorn Nuts and Wrench, attach

the Side Arms to the Backrest and Seat. There are

two mounting points on each side of the seat, and

one on each side of the backrest. Make sure the

nuts are on tight.

3. Now add the Center Support in between the Side

Arms. Attach an acorn nut to each side at the

bottom center of the legs and tighten.

4. Congratulations, your 4-Tier Display Planter is now

complete.

ASSEMBLING & USING YOUR PRODUCT