Instructions / Assembly

⑤
⑤
⑥
Place the assembled backrest on a level surface and insert the screws on
the back of the seat (B) into the holes on the center of the backrest parts.
Attach a large cap nut (F) on each of the four screws and turn clockwise
to tightly secure.
Align the two holes on the top of each leg (E) with the screws on the
bottom front of the seat (B). Make sure the legs are placed with the curve
facing outward. Attach a large cap nut (F) on each of the two screws per
leg and use the large wrench to turn clockwise to tightly secured.
Align the screws in the bottom support (D) with the hole at the middle of
each leg (E) and the two holes at the bottom backrest (C). Attach a large
cap nut (F) on each of the four screws and use the large wrench to turn
clockwise until tightly secured.
Congratulations. Your bench is now completely assembled.
Place it in a relaxing setting and enjoy!
Curve
faces
out.
Curve
faces
out.
Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have
been removed from the packaging.
Components:
Assembly:
Place the backrest parts (C) next to each other.
Insert the two screws on the back of the butterfly head (A) into the
holes on each tab at the upper part of each backrest.
From the back, attach a small cap nut (G) on each screw and use
the small wrench to turn clockwise until tightly secured.
1
2
C
Backrest Part
2x
A
Butterfly Head
1x
B
Seat
1x
G
Small
Cap Nuts
2x
F
Large
Cap Nuts
12x
E
Legs
2x
②
⑤
④
①
②
①
③
Secure seat to backrest from bottom with four
large cap nuts using the large wrench.
④
④
Back View
Secure butterfly head to each side
of backrest using small cap nuts.
Tighten securely with small wrench.
D
Bottom Support
1x
H
Large and Small
Wrench
⑥
Front View