PORT ABLE AIR COND ITION ER Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventative care on your part can save you a great deal of time and money over the life of your air conditioner. Before operating this product, please read the instructions carefully and save this manual for future use.
Read This Manual Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner. You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
CONTENTS SOCIABLE REMARK Sociable remark..................................................................................................................................2 SAFETY PRECAUTIONS Safety rules .......................................................................................................................................3 Operating condition ...........................................................................................................................3 Electrical information ..
SOCIABLE REMARK When using this air conditioner in the European countries, the follow information must be followed: DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. It is prohibited to dispose of this appliance in domestic household waste. For disposal, there are several possibilities: A) The municipality has established collection systems, where electronic waste can be disposed of at least free of charge to the user.
SAFETY PRECAUTIONS Safety rules To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. ! Always do this Your air conditioner should be used in such a way that it is protected from moisture. e.g. condensation, splashed water, etc. Do not place or store your air conditioner where it can fall or be pulled into water or any other liquid. Unplug immediately.
IDENTIFICATION OF PARTS For your safety Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord. WARNING Electrical Information Be sure the electrical service is adequate for the model you have chosen. This information can be found on the serial plate, which is located on the side of the cabinet and behind the grille.
IDENTIFICATION OF PARTS NAMES OF PARTS 4 1 Front 2 2 1 Operation Panel 2 Horizontal Louver Blade (swing automatically) 3 Carrying Handle (both side) 4 Remote signal receptor 5 5 Auto sliding panel 3 5 Fig.1 Rear 9 6 10 7 11 13 Fig.2 Model A Upper Air Filter (Behind the grille) 7 Air Outlet 8 Wheel 9 Air intake 10 Drain Outlet 12 8 6 11 Air intake 12 Lower Air Filter (Behind the grille) 13 Bottom tray drain outlet 9 6 10 7 11 12 13 14 Model B 5 8 Fig.
AIR CONDITIONER FEATURES ELECTRONIC CONTROL OPERATING INSTRUCTIONS Before you begin, thoroughly familiarize yourself with the control panel and remote controller and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit control panel alone or with the remote controller . NOTE: This manual does not include Remote Controller Operations, see the <> packed with the unit for details.
OPERATING INSTRUCTIONS Error codes: E1- Room temperature sensor errorUnplug the unit and plug it back in. If error repeats, call for service. E2- Evaporator temperature sensor errorUnplug the unit and plug it back in. If error repeats, call for service. E4- Display panel communication errorUnplug the unit and plug it back in. If error repeats, call for service. E5- The auto sliding panel malfunctionUnplug the unit and plug it back in. If error repeats, call for service.
OPERATING INSTRUCTIONS FOLLOW ME operation(on some models) This feature can be activated from the remote control ONLY. The remote control serves as a remote thermostat allowing for the precise temperature control at its location. To activate the Follow Me feature, point the remote control towards the unit and press the Follow Me button. The light on the unit control panel will illuminate to indicate it received the signal.
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Location 30c m 30 cm Fig.7 Horizontal window The air conditioner should be placed on a firm foundation to minimize noise and virbration. For safe and secure positioning, place the unit on a smooth, level floor strong enough to support the unit. The unit has casters to aid placement, but it should only be rolled on smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not attempt to roll the unit over objects.
INSTALLATION INSTRUCTIONS Installation in a double-hung sash windows Foam seal A (adhesive type) 1. Cut the foam seal(adhesive type) to the proper length and attach it to the window stool. Fig.10 Fig.10 Window kit 2. Attach the window slider kit to the window stool. Adjust the length of the window slider kit according to the width of window, short the adjustable window kit if the width of window is less than 27 inches. Open the window sash and place the window slider kit on the window stool. Fig.11 3.
INSTALLATION INSTRUCTIONS Installation in a sliding sash windows Foam seal A (adhesive type) Fig.14 Window panel 26.5 ~ 48 1. Cut the foam seal(adhesive type) to the proper length and attach it to the window frame. See Fig.14. 2. Attach the window slider kit to the window stool. Adjust the length of the window slider kit according to the width of window, short the adjustable window kit if the width of window is less than 27 inches.
INSTALLATION INSTRUCTIONS Exhaust hose installation: The exhaust hose and adaptor must be installed or removed in accordance with the usage mode. Fig.18 Fig.19 COOL mode Install FAN or DEHUMIDIIFY mode Remove 1. Install the window Exhaust adaptor B onto the exhaust hose as shown in Fig.18. or Fig.19. Refer to the previous pages for window kit installation. 2. Push the Exhaust hose into the air outlet opening along the the arrow direction(See Fig.20) Fig.
INSTALLATION INSTRUCTIONS Water drainage: Remove the drain plug During dehumidifying modes, remove the drain plug from the back of the unit, install the drain connector(5/8 universal female mender) with 3 4 hose(locally purchased). For the models without drain connector, just attach the drain hose to the hole. Place the open end of the hose directly over the drain area in your basement floor. Please refer to Fig.23 & 24. Fig.
CARE AND MAINTENANCE CARE AND MAINTENANCE IMPORTANT: 1) Be sure to unplug the unit before cleaning or servicing. 2) Do not use gasoline, thinner or other chemicals to clean the unit. 3) Do not wash the unit directly under a tap or using a hose. It may cause electrical danger. 4) If the power cord is damaged, it should be repaired by manufacture or its agency. Air filter (take out) 1. Air filter Fig.26 Remove the screws and take the air filter down - - Model A Fig.
TROUBLESHOOTING TIPS TROUBLE SHOOTING TROUBLES POSSIBLE CAUSES SUGGEST REMEDIES 1. Unit does not - P1 appears in the display window Drain the water in the bottom tray. Start when Pressing on/off Button - Room temperature is lower than the set temperature.(Cooling mode) - The windows or doors in the room are not closed. 2. Not cool enough - There are heat sources inside the blocked. doors are closed. Remove the heat sources if possible. Connect the duct and make sure it can function properly.
The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details.
