Operation Manual

14
Basic operation
1. Turn on:
In the off state, switch the button to the ON position, the blue LED flashes
with an indication tone.
2. Turn off:
Switch the button to the OFF position, the red LED flashes with an
indication tone.
3. Pairing:
Switch to the ON position , hold the multifunction button for about 6
seconds , the red and blue LEDs flash alternately , indicating that the
Bluetooth speaker is in searching and matching state. You can operate
your Bluetooth-enabled mobile phone to match.
4. Connection:
Connect your phone to the Bluetooth speaker after pairing is successful.
Connected with a mobile:
5. Answer a call:
After connection is successful, short press the multifunction button to
answer an incoming call.