Quick Start Guide

26 27
ENGLISH
Repairs and Accessories
Never remove the back of the TV set yourself. Repair and servicing of your TV set should only
be carried out by authorised TV technicians.
Cleaning
Use only a soft, clean, damp cloth to clean the TV set, the screen and remote control (do not
use any caustic or abrasive cleaning agents).
LCD/LED-Display
The TV set with an LCD/LED screen you have purchased meets the highest quality require-
ments and has been tested for pixel errors. Despite the utmost caution in production of the
displays, it cannot be totally ruled out that some of the pixels might be defective for techno-
logical reasons. Please understand that such effects cannot be considered a unit defect as
defined by the warranty as long as they are within the limits specified by the standard.
Recycling
Attention: The EU directive 2012 / 19 / EU regulates the proper way to recycle,
handle and utilise used electronic devices.
Hence, all used electronic devices are to be disposed of separately. Please do not
dispose of this set in the normal household rubbish.
You may return your used set free of charge at designated recycling centres or at your
specialist dealer whenever you purchase a new, comparable set.
You can find out more about recycling (also for countries outside the EU) from your
local government.
1.1 PACKAGE CONTENTS
• Power Cord • Operating Manual
• Remote Control • AC Adapter
• Cable
2. LOCATION AND FUNCTION OF CONTROLS
R-Line / T-Line / SL-Line
Item Button Name Description
1 CH+/- When you are watching the TV program, press these buttons to
select channel in ascending or descending order. Select the upper or
lower menu item in the OSD menu.
2 VOL+/- Increase or decrease the volume.
Adjust the values of the selected menu item in the OSD menu.
3 MENU Enter or exit from the menu
4 SOURCE Select an input signal.
5
Switch on the LED TV when at standby mode or vice versa.
SL-32 DSB / -I
Position Tastenbeschriftung Funktion
1 • Open / Close available in DVD Mode
• Play / Pause
2 VOL+/- • Increase or decrease the volume. Adjust the values of the
selected menu item in the OSD menu.
3 CH+/- • When you are watching the TV program, press these buttons to
select channel in ascending or descending order. Select the upper
or lower menu item in the OSD menu.
4 Source
MENU
• Select an input Signal
• Enter or exit from the menu
5
Switch on/off the LED TV
Attention:
Power indicator lights blue in standby and no light when TV is switched on.
R-Line T-Line