Electronic Viewfinder Operation Manual_v1.
Contents 1. Caution ............................................................................. 2. Components ..................................................................... 3. Main Features ................................................................... 4. Controls & Functions ........................................................... 5. Menu Tree & Adjustment ...................................................... 6. Menu Operations .............................................................
1. Caution • Always use set voltage. (DC 6.8-12V) • D-tap to mini XLR connection. • All operating instructions must be read and understood before the product is operated. These safety and operating instructions must be kept in safe place for future reference. • All warnings on the product and in the instructions must be observed closely. • All operating instructions must be followed. • Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result in accidents.
1. Caution • Unplug the power cord from the DC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Unplug the power cord from the AC outlet if you do not use the product for considerably long time. • Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. • Keep the product away from direct rays of the Sun-light.
2. Components EVF-035W-3G Camera Mount x 2 D-Tap Cable Operation Manual Operation Manual_v 1.
3. Main Features EVF-035W-3G Monitor contains the following features: • SDI signal compatibility - This product is compatible with various SDI signals - SD/HD/3G(A/B)-SDI 480i, 576i, 1080i, 1080p, 1080psf • HDMI signal compatibility - Supports HDMI(w/ HDCP) input is available without any other accessory. • HDMI To HDMI Active Loop Throughout - Supports HDMI-To-HDMI Active Loop Throughout function.
4.
4. Control & Functions SIDE • [F1](SCAN) Button - This Functions button is used to activate the feature selected in “DISPLAY & SET – F1 Key” menu. - Default setting of F1 Button is Scan Mode. • [F2](ASPECT) Button - This Functions button is used to activate the feature selected in “DISPLAY & SET – F2 Key” menu. - Default setting of F2 Button is Aspect. • [F3](MARKER) Button - This Functions button is used to activate the feature selected in “DISPLAY & SET – F3 Key” menu.
5. Menu Tree & Adjustment [1] Menu Structure [3] Menu Control Sequence • OSD(On-Screen Display) Menu helps you use various functions. • This Picture is the menu structure for EVF-035W-3G PICTURE Brightness Contrast Chroma Aper ture Scan Mode Aspect 3G Format DSLR Camera DSLR Scale Rotar y Lock 0 0 0 0 Over 16:9 Normal CANON 5D/7D Playback Unlock [2] Menu Control • User may control various functions using MENU button and the Rotary Control on the side of the monitor. 10 Electronic Viewfinder 1.
5. Menu Tree & Adjustment [4] Menu Tree PICTURE Brightness COLOR Color Temp 3200K 5600K 6500K 9300K User1 User2 User3 -100 ~ +100 Contrast -100 ~ +100 Chroma 50 ~ +50 Gain Red -128 ~ +127 Aperture (Sharpness) 25 ~ +25 Gain Green -128 ~ +127 Zero Over Pixel To Pixel User Gain Blue -128 ~ +127 Bias Red -128 ~ +127 Bias Green -128 ~ +127 Scan Mode Aspect 16:9 4:3 2.35:1 1.
5. Menu Tree & Adjustment [4] Menu Tree MARKER Marker Enable Off On Marker Color White Gray Black Red Green Blue Marker Type Off 16:9 4:3 4:3 ON AIR 15:9 14:9 13:9 1.85:1 2.35:1 1.
5.
5.
6. Menu Operations [1] PICTURE • 3G Format PICTURE Brightness Contrast Chroma Aper ture Scan Mode Aspect 3G Format DSLR Camera DSLR Scale Rotar y Lock 0 0 0 0 Over 16:9 Normal CANON 5D/7D Playback Unlock • Brightness - Used to set the brightness(=offset) level from -100 to 100. • Contrast - Used to set the contrast(gain) level from -100 to 100. • Chroma - Used to set the saturation level from -50 to 50. • Aperture (Sharpness) - Used to set the sharpness level from -25 to 25.
6. Menu Operations [2] COLOR • Color Copy COLOR Color Temp Gain Red Gain Green Gain Blue Bias Red Bias Green Bias Blue Color Copy 6500K 0 0 0 0 0 0 6500K • Color Temp. - Controls color temperature and allows instant access to preset color temperature settings. - Available color temperatures are 3200K, 5600K, 6500K, 9300K and User 1/2/3. - In User 1/2/3 modes, user can define custom RGB GAIN and BIAS (=Offset) values.
6. Menu Operations [3] MARKER • Fit Marker MARKER Marker Enable Marker Type Center Marker Safety Area Fit Marker Marker Mat Marker Color Thickness User Marker H1 User Marker H2 User Marker V1 User Marker V2 Of f Of f Of f Of f Of f Of f White 1 1 960 1 640 - Used to activate or inactivate the Fit Marker function. - When the Marker type is selected in the Marker menu, a border line of the Safety Area will be displayed inside the Marker. Images below show the difference between Fit Marker ON and OFF.
6. Menu Operations [4] ERROR CHECK ERROR • Range Error CHECK L( Y’)Zone Check L( Y’)Zone Adj Range Error Y’ Ma x Y’ Min C Ma x C Min Y’ Pic Blink C Pic Blink Of f 75% Of f 255 0 255 0 Of f Of f - Used to set whether or not to activate Y MAX, Y MIN, C MAX, C MIN, Y PICTURE BLINK and C PICTURE BLINK functions. - The values of Y MAX, Y MIN, C MAX, C MIN are indicated in WaveForm/VECTOR.
6. Menu Operations [5] AUDIO • Level Meter Size AUDIO Level Meter Lv Meter Disp Lv Meter Ref Lv Meter Size Peak Decay Time Of f Pair -18dB Small 0 - Used to control the size of the audio level meters. - Available options are NORMAL and LAGRE. • Peak Decay Time - Sets the reduction time for max value indication of audio signals. - Control range is from MIN 0 to MAX 100. - Bigger number means a longer display time for max value. • Level Meter - Used to set the Level Meter for the embedded audio.
6. Menu Operations [6] DISPLAY & SET DISPLAY&SET System Defauit Back Light Int Patern Time Code Focus Assist F/A Color F/A Level F1 Key F2 Key F3 Key F4 Key No 0 Of f Of f Of f Red 0% ScanMode Aspect Marker Enable L( Y‘)ZoneCheck • System Default - Used to initialize OSD values to factory default. • Back Light - Used to indicate the backlight level. - In case of System Default, the value returns to factory default(after color calibration). - Available values are from 0 to 50.
6. Menu Operations [7] SYSTEM SYSTEM RS-232 Type HDMI To SDI FPGA : 0.1 Upgrade Of f MCU : 0.1 • RS-232 Type - Choose between Firmware Upgrade or Calibration with RS-232(Phone Jack) terminal. - When Calibration is selected the screen is changed to white. To return to normal screen mode, choose upgrade mode. • HDMI To SDI - Select SDI output teminal Singal. - When it is "ON" HDMI input signal is output to SDI terminal. - When it is "OFF" SDI input signal is output to SDI terminal.
7. Other Functions [1] Pixel to Pixel • EVF-035W-3G provides pixel count information using Pixel to Pixel mode. Select [Scan] mode in the DISPLAY & SET menu or set the Scan mode to function Key to activate the[Pixel To Pixel] mode. • After activation of [Pixel To Pixel] mode, use the Rotary Control to move the position before the message window disappears. • If the message window disappears, repositioning menu is not available.
7. Other Functions [3] Luma(Y’) Zone Check ■ Color Pattern Type ■ Zebra Pattern Type • Displays the Luma(Y’) level of the input image in colors. • Displays the pixels with designated Luma(Y’) levels with zebra pattern. • Y’ ≥ 100% : Pixels with higher Y’ level than 100 turn to red. • Y’ ≥ 100%: Pixels with Y’ level over 100% turn to red diagonal line. • Y’ ≤ 0% : Pixels with lower Y’ level than 0 turn to green. • Y’ ≤ 0% : Pixels with Y’ level under 0% turn to green diagonal line.
7. Other Functions [4] Focus Assist • Focus Assist function assigns a color to the pixels in the shape or boundary area of the image to inform the user to make the best focus. • With this function, user can easily differenciate the focused area from out-focused area especially shooting with shallow depth of field. • Available types are [Mono] and [Color] types. * [Mono] : Background image is mono type. [Color] : Background image is original color type.
7. Other Functions [6] Internal Pattern • Displays internally generated test patterns. • The pattern consists of ColorBar and Pluge+ Grayscale Patterns. Full screen colors of various gray levels(0~100%) are also embedded.
7. Other Functions [7] DSLR Scale • This function is designed for some DSLR cameras(Canon 5D, 550D and Nikon D7000) that output different resolution from the operation mode (Playback, Live/REC Full, Live/REC 16:9). • Select the Camera model in the [Picture][DSLR Camera] menu. ■ CANON • In StandBy mode of Canon 5D Mark II, 1080i of HD resolution is indicated. However, real output resolution is 1620x1080 so blank area is displayed on the screen because the 16:9 aspect ratio is not realized.
8. Product Specifications EVF-035W-3G LCD Input Connector Output Input Signal Size 3.54” Resolution 960 X 640 Pixel Pitch 0.078(H) X 0.078(W) mm Color Depth 24-bits (R8, G8, B8) Viewing Angle 160(H) / 160 (V) Luminance of white Contrast Ratio 500cd/㎡ 1000 : 1 Display Area 74.88(H) X 49.92(V) mm 1 X BNC SDI Channel Input 1 X HDMI HDMI Input 1 X BNC SDI Channel (Active Loop Through Out) 1 X HDMI HDMI Channel (Active Loop Through Out) 3G-SDI 2.970Gbps HD-SDI 1.
9. Warranty Registration Registration Warranty Dear User, You became the owner of the Alphatron Electronic View Finder EVF035W-3G. We advise you to register your EVF-035W-3G before using. Direct registration at www.evf.tv/registration will give you the advantage to: - professional assistance through authorized Technical Service Providers Please keep this warranty card in a safe place together with your purchase invoice! You will receive a confirmation e-mail of your registration.
MEMO Electronic Viewfinder 29
MEMO 30 Electronic Viewfinder
FOR MORE INFORMATION PLEASE VISIT : www.alphatron.tv Spoorhaven 78, 2651 AV Berkel en Rodenrijs, The Netherlands TEL : +31 10 514 0680, FAX : +31 10 514 0699, E-mail : info@abe.
