Installation guide

IPDP - installation and operating instructions
32
=3 the keyboard connected on the second position (explanation of position
keyboard is on chapter 1.4.7(page 16).
8. Default value – presetings to the firm settings. After making changes use
the save changes button.
ATTENTION! This parameters setting will sharply influence whole DoorPhone
function.
3.2.2 All about relays
After making changes use the save changes button.
1. Relay mode:
=1 switch mode – it will close on command or password for period t1/2
(used for electrical locks, gate opening etc.)
=2 camera mode – it will close by guard pick up and open by hanging up.
=3 lighting mode – it will close by guard pick up and stay closed even for
period t1/2 after guard hanging up.