User manual

M ATHF ACTS IN A FLASH SMARTA PPLET
Setting the Receiver (Network) Name and Renaissance Place Address in the Renaissance Wireless Server Utility
5-2
. . . . .
User Manual
Setting the Receiver (Network) Name and Renaissance
Place Address in the Renaissance Wireless Server
Utility
Setting the Receiver (network) name helps students identify the Receiver they
want to connect to. Entering the Renaissance Place address provides the
utility with the server address where MathFacts in a Flash RP is installed.
This enables the utility to send information about students’ work from NEO 2
to MathFacts in a Flash RP.
Follow these steps to change the Receiver name and to enter the Renaissance
Place address in the settings:
1. Start the Renaissance Wireless Server Utility:
• Windows computers: Right-click in the lower-right corner of your
computer screen (in the system tray) and choose Manage from the
menu that appears. You can also click Start  Programs 
Renaissance Wireless  Server Renaissance Wireless Server
Utility.
• Macintosh computers: In your computer’s Applications folder, open
the Renaissance Wireless Server folder. Then, double-click
Renaissance Wireless Server Utility.
2. Type 1234 and click OK to log in. (This is the default Administrator PIN. If
you have changed the PIN, enter your new PIN.) If necessary, click Start.