User manual

R ESPONDER
Using NEO 2 with the 2Know! Toolbar
2-8
. . . . .
User Manual
6. When you’ve finished answering questions, the teacher can shut down
the 2Know! Toolbar program. The next time you press enter, NEO 2 will
tell you there is no session and ask if you want to search for networks.
Press N for no and press enter to go back to the SmartApplets menu.
How Teachers Can Use NEO 2 to Control the 2Know! Toolbar Program
Teachers can use NEO 2 to control the 2Know! Toolbar program. The steps
are similar to those you would use on a Responder:
1. In the 2Know! Toolbar program,
click the Options button and
choose Teacher Responder
from the menu.
2. Click Assign in the Teacher
Responder dialog box. The
program will show you a PIN.
Leave this dialog box open.
3. Press on/off on the NEO 2 to turn it on.
4. Press applets.
5. Make sure the cursor is next to Responder; then, press enter.
6. NEO 2 will attempt to join the session. If you have connected to a
Renaissance Receiver before, it will ask if you want to stay connected to
it; press Y for yes or N for no. Then, press enter.
If you haven’t connected to a Renaissance Receiver before, NEO 2 will
show you a list of networks (Renaissance Receivers). Use the arrow keys
to highlight the one you want to connect to; then, press enter.
7. When NEO 2 asks you to enter the Teacher Responder PIN, enter the
one that is shown in your 2Know! Toolbar program. Then, press enter.
8. In the 2Know! Toolbar program, click Close to go back to the toolbar.
9. NEO 2 will list your options. Press A to ask a question, B to show a graph,
or C to minimize the Toolbar on your computer or maximize it again; then,
press enter.
Once you choose to view a graph, you can press A to stop receiving
responses, B to close the graph, C to reset so that participants can
answer again, or D to mark or enter the correct answer; then, press enter.