User manual

A BOUT SMARTA PPLETS
Disabling SmartApplets on NEOs
1-5
. . . . .
User Manual
Disabling SmartApplets on NEOs
You can disable SmartApplets so that they cannot be used on your NEO(s).
The SmartApplets are not deleted, but they are not available until you enable
them again. (To delete SmartApplets, see page 1-8.)
There are two ways to disable SmartApplets: you can change the settings in
AlphaSmart Manager, or you can disable SmartApplets on the NEO itself.
You’ll find both procedures below.
Disabling SmartApplets on the NEO Itself
1. With the NEO on, press applets.
2. Use the arrow keys to move the cursor next to the SmartApplet that you
want to disable.
3. Press ctrl--L.
4. Enter the NEO’s master password. (This password is set in AlphaSmart
Manager in the System settings; for more information, see the
AlphaSmart Manager 2 User Manual.)
Disabling SmartApplets within AlphaSmart Manager
You need AlphaSmart Manager installed on your computer to follow these
steps.
1. If you have a single NEO, use the USB cable that came with your NEO to
connect it to your computer.
If you have a SmartOption Mobile Lab with several NEOs, make sure that
the NEOs are connected to the appropriate cables in your cart and that
your computer is connected to the cart.
2. Start AlphaSmart Manager on your computer.
3. Click the Settings tab.
4. In the list on the left (
A on the next page), click the SmartApplet that you
want to disable.