User manual

B EAMER
Beaming from a NEO to a Palm OS Device
8-7
. . . . .
User Manual
To beam between a NEO and a Palm OS device, both devices must have
infrared ports and be within three feet of each other.
Follow the steps below to beam an AlphaWord file to a Palm OS device.
Steps to Follow on the NEO (the Sending Device)
1. Turn on both the NEO and the Palm OS device.
2. On the NEO, open the AlphaWord Plus file that you want to send.
3. Make sure the Palm OS device is within three feet of the NEO, and that
both devices have their infrared ports pointing at each other.
4. Press ctrl-send on the NEO. Beamer begins beaming the file to the Palm
OS device.
Steps to Follow on the Palm OS Device (Dana, Dana
Wireless, or a Handheld Device)
To receive the beamed file on your Palm OS device:
1. Make sure your Palm OS device is turned on and is within three feet of
the NEO, with its infrared port pointing at the NEO’s port.
2. On your Palm OS device, tap Yes in the Beam Status dialog box that
appears.
This message appears when
you beam an AlphaWord file to
a Palm OS device
This message appears when
you beam a Memo Pad file to
a Palm OS device