User manual

C ONTROL PANEL
AlphaWord Settings
7-4
. . . . .
User Manual
AlphaWord Settings
You can change the following AlphaWord settings:
Turn Show Marks in Files On or Off
When “Show Marks” is on, as you write in AlphaWord Plus, you will see right
arrows where you insert tabs, and you’ll see return arrows when you press
enter.
To change the setting, move the cursor next to the setting and press enter to
switch from “On” to “Off” or from “Off” to “On.”
You can also set Show Marks from within AlphaWord Plus by pressing
option--k, pressing 3 when the instruction screen appears, and then
pressing esc to exit the screen.
Turn File Passwords On or Off
When you first receive your NEO, you cannot set a password for each file until
you turn file passwords on. You can do this using the Control Panel setting on
your NEO or using AlphaSmart Manager (see the AlphaSmart Manager 2
User Manual).
To turn file passwords on using the Control Panel AlphaWord settings, you
need the master password. (You can set the master password for NEOs using
AlphaSmart Manager. If you want to use the default master password, contact
Technical Support to get the password.)
If you turn file passwords on, whenever you press one of the file keys or open
a file, you will be asked to enter the file password. (If you don’t know the
individual file’s password, you can enter the master password instead.)
When you send text
to your computer
and you have Show
Marks on, the arrows won’t
transfer to your computer, but
the tabs and returns will.
Carriage return
Tab