User`s guide

AlphaSmart 3000 53
Status Screen
Press option-x-V to get to the system status screen. This command works
in stand-alone mode only, not when the AlphaSmart 3000 is attached to a
computer. This screen tells you the AlphaSmart 3000 version number, what
the current file number is, and the status of the AutoRepeat, Sticky Keys,
and Password Protection features, as well as which keyboard layout option
is currently in use.
AlphaSmart 3000 Password Protection
When multiple users share one AlphaSmart 3000, it is sometimes useful to
password protect each file to keep the contents private and protected from
accidental loss. The AlphaSmart 3000 is shipped with password protection
disabled.
To enable AlphaSmart’s password protection feature for the first time, you
will need to contact AlphaSmart, Inc. to obtain the master password
encoded into each AlphaSmart 3000. To obtain the master password, call
toll-free at [phone]. You may also fax your request (please include
your fax number) to [phone].
Enabling the Password Option
1. Turn the AlphaSmart 3000 on and make sure it is not connected to a
computer.
2. Press ctrl-option-x-p to show the Password Enable/Disable screen.
The AlphaSmart 3000 will display the message:
Password protection is OFF.
Type master password to turn on:_____
3. Type in the five-letter master password you obtained from
AlphaSmart, Inc. to turn the password protection on (to turn it off,
follow the same steps). As you type the old password, the password
will appear as Xs on your screen. When the password has been
entered correctly, the AlphaSmart 3000 will display:
AS3000UG.book Page 53 Tuesday, June 25, 2002 12:19 PM