User guide

8
8. Connecting to Telephone Socket
When the setting up instructions have been completed, connect the plug at the end of
thetelephoneleadintothetelephonesocket.Theplugwillonlytthecorrectwayround.
9. Setting the Clock
1. Lift up the Handset or press the Handsfree button
2 PressSetbutton,themonthsettingashesinthedisplay
3. Press * KEY repeatedly to select the correct month
4. Press#KEYtoconrmthesetting.TheDaysettingwillthenashinthedisplay
5. Press * KEY repeateldy to select the correct Day
6. Press#KEYtoconrmthesetting.TheHoursettingwillthenashinthedisplay
7. Press * KEY repeatedly to select the correct Hour
8. Press#KEYtoconrmthesetting.TheMinutessettingwillthenashinthedisplay
9. Press * KEY repeatedly to select the correct Minutes
10.PressSETkeyagaintoconrmthesetting
11. Replace the Handset in the cradle or press Handsfree button to disconnect the line.
After approximately 6 second the Date/Time will be displayed
10. Setting the Ringer
RINGER OFF/LO/HI switch.
Set the switch to the LO or Hl position as desired to give a quiet or loud ring. The Ringer
may also be switched OFF by setting the switch to the OFF position. Outgoing calls may
still be made with the switch set to the OFF position.
RINGER PITCH switch.
Set the switch to the Hl, MED or LO position to adjust the pitch of the ringer.
11. Wall Mounting
You may wish to mount the a300 Headsetphone on a wall.
To do this:
- Slide the plastic, “wall mount” upwards to remove, turn it around and replace it in the
slot.
- The Handset will then stay in the cradle when the telephone is on the wall.
- Position screw into the wall ensuring that the screw head is 5mm from the wall.
- Place the telephone on the screw using the keyhole slot on the rear of the telephone.