Data Sheet

Product Specification Sheet APS715 - Rev. 11/2013
SI005 Wireless LED Messaging Sign (TC500 Series)SI005 Wireless LED Messaging Sign (TC500 Series)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2017 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
Architects' And Engineers'Architects' And Engineers'
SpecificationsSpecifications
The Wireless Alphanumeric LED Message Sign(s)
shall be Alpha Communications® / TekTone
SI005 or approved equal. The SI005 shall have a
large single-line display and shall be capable of
storing up to 24 messages. The unit shall
provide a choice of tone modes for page
annunciation. The LED message sign shall be
preprogrammed to receive patient call
information from the TC500 Wireless Emergency
Call System and/or Tek-CARE®400
(TC400) Nurse Call System via the NC369 Paging
Transmitter. The LED message sign shall be
programmable for up to six (6) CAP codes. The
sign shall annunciate and display alphanumeric
patient call information as generated by the
emergency or nurse call system. NOTE: the LED
message sign is an ancillary method of
call annunciation, and is not intended to replace
the primary annunciation provided by the nurse
call system.
TekTone® has designed the Tek-CARE®500 to
work as a system. Its NC501ES Master Station
Computer has been carefully designed and
matched to work with Tek-CARE®500 wireless
and wired peripherals. TekTone® will not
warrant or support components of Tek-
CARE®500 that are purchased separately unless
the components are add-ons to previously sold
systems. TekTone® will also not warrant or
support a system that is a mix of TekTone® and
Non-TekTone® parts, unless prior written
permission has been obtained. In order to track
our systems and to inform facilities of software
upgrades, full site information (site name,
address and phone number) will be required
when ordering. Site information and NC501ES
warranty number will also be required when
requesting technical support
SI005 Wireless Alphanumeric LED Message SignSI005 Wireless Alphanumeric LED Message Sign
The SI005 LED Message Sign is a radio paging receiver with a large one-line
alphanumeric display.It is designed for use with the Alpha Communications® /
TekTone® TC500 Wireless Emergency Call and Tek-CARE®400 (TC400) Nurse Call
Systems.
The SI005 stores up to 24 messages. The messages are deleted after a
predetermined length of time.
Messages are automatically deleted as new messages arrive (beyond the 24 message
limit), with the oldest messages being deleted first. The SI005 may be configured for
annunciation via audible tones. The SI005 has been pre-programmed to receive
call information from the TC500 and/or TC400 systems, and it can be programmed for
up to six CAP codes.
FeaturesFeatures
One-line backlit LED display
Displays 10 to 40 alphanumeric characters per line
Configurable for audible alerts
Wireless data input
Receives text messages from either TekTone® system
SpecificationsSpecifications
Dimensions:
Height: 6.75" (172mm)
Width: 28.0" (712mm)
Depth: 4.25" (108mm)
Weight: 8.4 lbs
Construction:
LED display board with RF paging circuitry enclosed in a
plastic housing.
Power Supply: Input 115VAC
Operating
Frequency:
457.550 Mhz
Required ComponentsRequired Components
NC369 Pager Transmitter