Data Sheet

Product Specification Sheet APS903 - Rev. 07/2014
RCB2100B Refuge Call Box RCB2100B Refuge Call Box (AlphaRefuge™ (AlphaRefuge™ 2100 Series)2100 Series)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2016 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
Model RCB2100BD or
RCB2100BR (shown)
Architects' And Engineers'Architects' And Engineers'
SpecificationsSpecifications
The AlphaRefuge™ 2100 Series system
Refuge Call Box(es) shall be Alpha
Communications® RCB2100B series, or
approved equal.
The Refuge Call Box(es) shall be Surface
Mount type and shall be Black Plasticwith
a matching surface
backbox/housing. The Refuge Call Box(es)
shall contain a built-in battery back-up
and charger circuitry and shall be
programmable with an outgoing voice
message. The Refuge Call Box(es) shall be
capable of dialing up to five (5) remote
phone numbers and shall contain a built-in
call button and Red call placed / call
answered LED.
The Refuge Call Box(es), shall be IBC,
NFPA and ADAAG code compliant.
Contractor shall observe all local and
national electrical and building codes.
RCB2100B Refuge Call Box RCB2100B Refuge Call Box (AlphaRefuge™ (AlphaRefuge™ 2100 Series)2100 Series)
The Alpha Communications® RCB2100B Series Refuge Call Boxes are used with the
AlphaRefuge™ 2100 Series Area of Refuge system, and are Surface Mount type.
The PWR2410A can provide power for the RCB2100B series Refuge Call Boxes, which
operate on 24VDC 'remote' power (suffix-R). The PWR2410A is not needed when
the RCB2100B series Refuge Call Boxes are powered by 'direct' 120VAC power (suffix-D).
The RCB2100B Series Refuge Call Boxes come standard with a built-in call button.
The RCB2100B Series Refuge Call Boxes come standard with a built-in back-up battery and
charging circuitry and feature a Red call placed / call answered LED.
Only one (1) PWR2410A power supply is needed per system.
FeaturesFeatures
Black Plastic faceplate and matching surface backbox/housing
Fully Automated Operation
Location Identification Message
Five (5) Number Dialing Capability
On-site or Remote Programming
Built-in Consolidator Feature
Phone Line Monitoring / Relay Alarm
Built-in Call Button
Call Placed / Call Answered LED
IBC, NFPA, ADAAG Code Compliant
Braille Label
Built-in Battery Back-up and Charging Circuitry
Options (at extra cost) include Strobe & Interface Relay, Stainless Steel finish or Red
powder coated finish over steel.
Made in USA
SpecificationsSpecifications
Dimensions: 4.75"W (121mm) x 7.25"H (185mm) x 1.875"D (48mm)
Surface Enclosure: Matching Black Plastic