Data Sheet

Product Specification Sheet APS777 - Rev. 07/2013
NC506ES Remote Receiver and 4 Relay Unit (TC500 Series)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS776) Next (APS778) >
Architects' And Engineers' Specifications
The NC506ES shall provide remote annunciation of call
activity within the Tek-CARE®500 (TC500) Wireless Emergency
Call System.
It shall function independently of the TC500 master station
computer. It shall provide dry contact outputs which are Form-C
and capable of driving a typical 24-volt dome lamp as used in the
call systems. The NC506ES shall also allow the use of an external,
model TAK-4202 or TAK-4208 dialer, that accepts dry contact
input(s). The NC506ES shall also enable SF501ES, SF501/2ES and
SF502ES transmitters to trigger the external dialer.
All programming shall be non-volatile. The unit shall provide
for easy connection of field wiring. Access to the interior of the
case shall be secured by a built-in tamper switch - for easy
connection to a third-party alarm system. The NC506ES shall be
designed for indoor use only, and shall feature hidden cable
connections and access. The current status of all outputs shall be
visually indicated on the face of the unit.
TekTone® has designed the Tek-CARE®500 (TC500) to work as a
system. Its NC501ES Master Station Computer has been carefully
designed and matched to work with TC500 wireless and wired
peripherals. TekTone® will not warrant or support components
of TC500 that are purchased separately unless the components
are add-ons to previously sold systems. TekTone® will also not
warrant or support a system that is a mix of TekTone® and Non-
TekTone® parts, unless prior written permission has been
obtained. In order to track our systems and to inform facilities of
software upgrades, full site information (site name, address and
phone number) will be required when ordering. Site information and
NC501ES warranty number will also be required when requesting
technical support.
NC506ES Remote Receiver
The Alpha Communications® / TekTone NC506ES is designed to
allow users of the Tek-CARE®500 (TC500) Wireless Emergency Call
System to connect external dome lamps and dialers to the system.
This provides for an alternate annunciation path, in addition to the
normal TC500 screen. The NC506ES is not dependant upon the
Tek-CARE®500's master station computer. It features 4 separate,
dry-contact outputs that can be programmed for activation by up
to 4 transmitters.
The case has built-in tamper detection outputs for connection to
an external alarm system. All dry contact outputs are individually
configurable for latching, follower or momentary activation modes.
The unit is designed for indoor use only, and cable access and
connections are hidden. The face of the unit features a clean
appearance with visual indication of the status.
The SF501ES and SF502ES transmitters can be used with the
NC506ES to trigger an external dialer, but these momentary
transmitters do not support dome light annunciation.
Features
4 dry-contact Form-C outputs
Screw terminal connections
Wiring access via hidden port
Built-in tamper switch
LEDs display current status of transmitters
Functions independently of Tek-CARE®500
Clean appearance for interior mounting
Specifications
Dimensions:
6.50"W X 3.50"H X 1.00"D (166mm X 89mm X
26mm)
Environment:
32°F–140°F, 0%–90% non-condensing relative
humidity
Construction: Beige plastic outer casing
Connections: Barrier type screw terminals
Mounting: Surface mount via 2 screws (included)
Power: 10-14VDC @ 50mA (supplied by PK505)
Required Components
PK505 Power Supply (1 per NC506ES required)