Data Sheet

Product Specification Sheet APS187 - Rev. 07/2013
N553A Lamp/Bulb Extraction Tool for Bulb MaintenanceN553A Lamp/Bulb Extraction Tool for Bulb Maintenance
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2017 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
N553A Bulb Extraction Tool The Alpha Communications® model N553A bulb extraction tool is used
primarily with our lighted annunciator units, for bulb extraction and replacement. It can be used with
our CM800, DS100, NC110N, NC150N, NC150R, NC200N, SB5000 and other annunciator panels,
using our model LI014 bulbs, (or LI014K kits) or the equivalent physical size.
While not required for system operation, most specifications call for the installing contractor to
provide the facility with any "special tools" required for proper system maintenance.
We recommend that the installing contractor provide a model N553A bulb extraction tool, with each
master annunciator station.
Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications
For each lighted annunciator panel (master station), contractor shall furnish one (or more) Alpha Communications® model N553A bulb
extraction tools, or approved equal. Tool shall be used to easily replace the Model LI014 (or equivalent) annunciator bulbs, by the building
management or maintenance dept.