User`s guide

Preface

164201085 Rev. F0

Cautions

NOTE: Enclosure, equipment or parts may be damaged or cause damage if used

or installed improperly.

To avoid damage

• Prior to installation, verify that the AC input voltage to the enclosure and its

equipment match with respect to voltage and frequency.

• Prior to installation, verify that the output voltage from the enclosure or its

equipment match the voltage requirements of the connected equipment (load).

• Prior to installation, verify that the enclosure’s utility service panel is equipped with

a properly rated circuit breaker for use with the equipment inside. Refer to

manufacturer’s recommendations.

• Review and upgrade utility service panel circuit breaker requirements whenever the

equipment within the enclosure is changed.

• Prior to installation, contact local utilities, local building maintenance departments,

and cable/ piping locator services to ensure that installation does not interfere with

existing utility or building cables/piping.

• Do not exceed the output rating of equipment. Verify load requirements prior and

during connection process.

• Prior to handling the batteries, touch a grounded metal object to dissipate any static

charge that may have developed on your body.

• Alpha Technologies is not responsible for unit damage due to enclosure or

installation temperatures which exceed the operating temperature of the product.

General Safety Precautions