User`s guide

39
6. Specifications
164201085 Rev. F0
Parameter Specification
Quantity 3 each
Voltage 12 Vdc
Type Sealed lead acid (non-flooded)
Recommends Battery Absorbed glass mat or gel
Ampere Hour Rating 40 AH to 100 AH
Input Voltage 36 Vdc
Input Current
(Max. during battery discharge) 35A @ 60 Vac
42A @ 72 Vac
50A @ 87 Vac
Input Protection 100A circuit breaker
Float Voltage 41.4 volts ± 1.5% (2.30 volts/cell) at nominal temp.
Initial High Charge Voltage 43.4 volts ± 1% (2.41 volts/cell) at nominal temp.
Charge current 6A average (minimum)
Charger Temperature Compensation 2.8 mV per cell, per degree, below/above 25°C
Low Battery Cutout <31.5 volts(1.75 volts/cell)
6.3 Battery Specifications