User`s guide

2. Cabinet Installation
13
164201085 Rev. F0
The standard cabinet is designed to be pole-mounted. Wooden pole mount applications
utilize machine bolts to attach the enclosure mounting brackets to the pole, while installations
done on concrete or steel poles utilize straps to attach the mounting bracket(s) to the pole.
NOTE: Mounting bolts must go completely through the wooden pole and be
secured from the back with a large washer and nut. The two galvanized
mounting brackets are placed between the enclosure and pole. Most codes
require the base of the enclosure to be located a minimum height from the
ground. Always verify height restrictions before proceeding.
NOTE: The majority of poles are the property of the local Utility. Before installing an
enclosure, the location and method of mounting must be approved by the
Utility.
This chapter contains instructions for pole mount and ground mount installations
including the electrical connections.
A bucket truck and other suitable equipment, such as spikes and safety harnesses, should be
used during installation or service of pole-mounted cabinets. To mount the ZTT/Plus UPS to
a utility pole perform the following steps:
NOTE Pole mounting the cabinet should be done in accordance with the local
agreement between the cable operator and the utility company.
The disconnect box should have a high magnetic circuit breaker capable of passing short
duration inrush currents and have a 20A minimum rating.
2.1 Pole-Mount Cabinet