Operator`s manual

164201257 C0 Page 34 6/13/2003
Preliminary
Lectro CPR
®
Operator’s Manual
Weak Battery LEDs
(One for each string)
RS-232 DB-9 Port for connection to
Transponder, Modem, Laptop PC or
customer-supplied PDA.
Figure 4.3-2: Front of CPR Communicator Module (Level Two)
Figure 4.3-3: Front of CPR Communicator Module (Level Three)
Battery Sensing Harness (connects
to battery terminals)
Wiring to External Cabinet
LEDs
Door Tamper Switch connector
(shown with shorting jumper)
Battery Sensing Harness (con-
nects to battery terminals)
Wiring to External Cabinet
LEDs
Door Tamper Switch connector
(shown with shorting jumper)
F81 Connector for RF Output
Direct to Coax
Transmit and Receive Frequency
Label