Specifications

29745-838-B0-001

4.0 Proprietary Management Information Bases (MIBs)

You need to use two proprietary MIBs from AM Networks to successfully conﬁ gure the XP-EDH-A to

use the power supplies described in this manual. Compile these two MIBs onto a network manager or

MIB browser software.

Object Description

amDocsisDevicesTable

Oid: 1.3.6.1.4.1.2183.2.3.3.1.2

Set to the type of supply being monitored:

alphaXM2 (2) default

alphaXM (3)

alphaAM/AP (4)

lectroSentryII (5)

lectroZTT (6)

lectroZTTPlus (7)

amDocsisOPVoltageScaling

Oid: 1.3.6.1.4.1.2183.2.3.6.5

Set to 1 for DC powered transponders in Alpha XM2 type

supplies using USM2 or USM2.5 cards.

Set to 2 for DC powered transponders in Alpha XM type

supplies using USM cards.

Set to 3 for legacy power supplies (AM/AP, Lectro ZTT, ZTT+)

amDocsisInputVoltageMeasScaling

Oid: 1.3.6.1.4.1.2183.2.3.6.6

Set to 1 (default) for 110V powered supplies (Alpha or Lectro)

Set to 2 for 220V powered supplies (Alpha or Lectro)

Note: Presently this object is used in conjunction with Alpha’s

110V or 220V wall/brick transformers to sample the input line

voltage.

The scaled voltage available in the Alpha USM2.5 cards report

the input line voltage.

Table 4-1, Proprietary MIBs

To see a speciﬁ c example of a MIBs ﬁ le for a particular power supply, see that section of the manual.

The objects available are: