Specifications

CUTTING SYSTEM
6
The Alpha
®
Groove Cutter is designed to cut
awless grooves. Our patented design assures
the grooves will be level for decorative accents
or to achieve maximum strength for joint
seaming. Choose between two sizes to match
the thickness of your material.
The Groove Cutter works with the most
popular high-speed angle grinders
available on the market. A universal
safety guard equipped with a
water-feed and a Ground Fault
Circuit Interrupter are the perfect
accessories for this application and
are available from Alpha
®
.
PART NO. MAX RPM ARBOR(S) FOR USE ON
GCW258 14,500 5/8”-11 Threaded 3/4” Granite Slab
GCW358 14,500 5/8”-11 Threaded 1-1/4” Granite Slab
MCW258 14,500 5/8”-11 Threaded 3/4” Marble Slab
GCWKIT Universal Safety Guard Kit
UNIVERSAL SAFETY
GUARD KIT
GROOVE CUTTER
Alpha
®
Hot-Rod for Granite
For Cutting Channels for Stainless Steel Rods and Grout Removal
US Patent No. 7,213,591
Alpha Professional Tools
®
has improved the
efciency of tile contractors by expanding the
usage of the Hot-Rod blade for the removal
of grout. The Hot-Rod for Granite blades
were created with diamond grits and matrix to
ensure a long cutting life. When used with the
Ecocutter, the 3”diamater blade allows for easy
use while removing grout on the job site without
water, creating a portable, dust-free grout
removal solution. This blade is available in three
thicknesses: 1/4”, 3/16”and 1/8”. Tile contractors
agree, this is the best system for this application!
PART NO. SIZE MAX RPM ARBOR(S) RECOMMENDED FOR FOR USE ON
HR03A+ 3” 14,500 7/8”, 20mm 1/4” ROD GRANITE
HQ03A+ 3” 14,500 7/8”, 20mm 3/16” ROD GRANITE
HT03A+ 3” 14,500 7/8”, 20mm 1/8” ROD GRANITE
Alpha
®
Groove Cutter - For Wet Cutting Grooves for Concrete Decorative Accents
1/4”
3/16”
1/8”
HR03A+
HQ03A+
HT03A+
Accent Rod Inserted