TOOLS FOR CONCRETE CONTRACTORS VERSION 4 New Series of Diamond Blades! See our complete series of Grinding Discs for curved surfaces, shaping and coating removal.
Copyright © 2014 Alpha Professional Tools®. All rights reserved.
Contact Information COMPANY HEADQUARTERS: Alpha Professional Tools® 103 Bauer Drive Oakland, NJ 07436 Hours of Operation: 8:30 a.m. – 5:00 p.m. EST Telephone Number: 201-337-3343 Toll-Free Number: 800-648-7229 Fax Number: 201-337-2216 Customer Service Fax Number: 800-286-0114 Tool Department Fax Number: 201-337-2265 Accounting Department Fax Number: 201-337-2262 E-mail orders to: orderdesk@alpha-tools.com E-mail Spare Parts orders to: tooldesk@alpha-tools.
Contents CUTTING SYSTEM Ecocutter, Stand-Alone Tool for Dry Cutting Applications................................................................1 DRY BLADES Ultracut - APR Series.............................................................................................................................2 Ultracut - GPM Series.............................................................................................................................3 Ultractu - ABM Series......................................
Contents HAND TOOLS AND ACCESSORIES HAND TOOLS ECG-125, High Performance Grinder with Built-in Vacuum System...............................................15 HSG-125, High-Speed Angle Grinder..................................................................................................16 WDP-120, Wet/Dry Polisher.................................................................................................................17 VSP-120, Variable Speed Wet Polisher...........................................
CUTTING SYSTEM Alpha® Ecocutter Ultimate Stand-Alone Tool for Your Dry Cutting Applications The Ecocutter Dry Tile Cutting System was first introduced as a portable dry cutting system for tile installers. This system included the Ecocutter, table and stand. Now, Alpha Professional Tools® is offering the Ecocutter as a stand-alone tool for all your dry cutting applications.
Alpha® Ultracut - APR Series Hybrid Blade For Intricate And Flush Cutting Application CUTTING SYSTEM The Alpha® Ultracut APR Series combines the high-performance of the Alpha® Ultracut GPM Series with our unique design for flush cutting applications. Unlike other blades, the Ultracut APR Series blade accepts our exclusive Quad Drive Adapter, which eliminates the required lock nut, so it is perfect for “flush cutting” applications.
Alpha® Ultracut - GPM Series CUTTING SYSTEM The Ultimate Vacuum Brazed Diamond Blade The Alpha® Ultracut GPM Series is made for building contractors and fabricators who work with metal and composite materials. The GPM Series blade fits on most popular handheld electric power tools for demanding metal applications.
Alpha® Ultracut - ABM Series CUTTING SYSTEM Exclusively For Pneumatic Cut-Off Tools The Alpha® Ultracut ABM Series is designed for use on most popular pneumatic cut-off tools which are widely used in automotive body shops and many other industrial manufacturing facilities. The Alpha® Ultracut doesn’t change diameter during the cutting operation and provides maximum cutting depth throughout its life.
Alpha® Tuck Point Wheel CUTTING SYSTEM For Brick Re-Pointing The Alpha® Tuck Point Wheel is specifically designed for brick re-pointing and flash installation. This dry cutting wheel fits on 4”, 4-1/2” and 7” grinders. Masons and brick re-pointers will find the Alpha® Tuck Point Wheel to be very aggressive and long lasting. The Alpha® Tuck Point Wheel is segmented with a very hard bond that resists the abrasive mortar commonly used in brick laying.
Alpha® Hot-Rod for Granite CUTTING SYSTEM For Cutting Channels for Stainless Steel Rods and Grout Removal Alpha Professional Tools ® has improved the efficiency of tile contractors by expanding the usage of the Hot-Rod blade for the removal of grout. The Hot-Rod for Granite blades were created with diamond grits and matrix to ensure a long cutting life.
Alpha® Profiler B-Series CUTTING & PROFILING Wet Cutting Profiler for Concrete, Granite, Marble, Engineered Stone and Porcelain Alpha® Profiler B-Series, is designed to produce a roundover on concrete, granite, marble, engineered stone, porcelain and crystallized glass tile and slab. Equipped with a 5/8”-11 female thread and internal water passage holes, the Alpha® Profiler B-Series will fit the AIR‑658, AWP‑158, VSP-120 and other brands of center water-feed polishers.
Alpha® Profiler F-Series CUTTING & PROFILING Wet Cutting Profiler for Concrete, Granite, Marble, Engineered Stone and Porcelain Alpha® introduces a new addition to the Profiler Series with the Profiler F, commonly known as Ogee. Since creating an Ogee edge requires a large amount of material to be removed, Alpha® recommends a two‑step process to make your operation easier. Position 0 breaks the corner fast, followed by Position 1 to complete the Ogee profile.
Alpha® Crack Chasing Wheel CUTTING & PROFILING Crack Chasing, V-Cut Style Wheel for Concrete Repair With the increased popularity of concrete being used inside and outside the home, Alpha Professional Tools® has developed the Alpha® Crack Chasing Wheel for repairing concrete cracks. This V-cut style wheel produces a 1/2 inch wide, 70‑degree, V-shaped groove for recaulking and re-filling cracks.
Alpha® Wet Core Bit Ultimate Wet Core Bit for Concrete, Granite and Engineered Stone DRILLING The Alpha ® Wet Core Drill Bit is designed for drilling the faucet-mounting holes in countertops and vanities. It can also be used to make clean rounded corners for square or rectangular sinkholes.
Alpha® Vexcel Grinding Disc GRINDING Rigid Grinding Disc With Fluoric Rubber Backing To Reduce Noise and Vibration The Vexcel is designed for heavy duty material removal applications whether it is cast iron, steel, stainless steel, non-ferrous metals, metal alloys, carbon fiber reinforcement plastic (CFRP), glass fiber reinforcement plastic (GFRP), natural and engineered stones.
Alpha® Spike Disc GRINDING Coating Removal and Surface Preparation Patented technology makes this unique product available for “Clog-Free” coating removal for epoxy, urethane, glue and adhesives for surface preparation. An Open-mesh diamond layer removes debris fast avoiding heat buildup. Each diamond bead was made with multiple diamond grits to maintain a sharp cutting capability for a long time.
Alpha® Vextra Grinding Disc- Flat Grinding Disc GRINDING Flat Grinding Disc For The Ex ZONE Where Spark Reduction Is A Priority Designed to grind steel, stainless steel and non-ferrous metals for the Ex ZONE where spark reduction is a priority. The Vextra is great for removing rust, burrs, mill scale, paint on metal surface as well as epoxy, glues and adhesives without clogging the grinding surface.
Alpha® VFlex Flexible Sanding Disc GRINDING General Purpose Flexible Sanding Disc The VFlex sanding disc is perfect for paint, coating, oxide and rust removal, grinding burr and chamfering on the edge of steel, stainless steel and contoured surfaces. The VFlex has a flexible, rubber-sandwiched cushion body that dramatically reduces unpleasant noise and vibrations. The disc follows the surface curve with ease as well as offers a long life and high-performance reducing downtime replacing tooling.
Alpha® ECG-125 HAND TOOLS & ACCESSORIES The Ultimate High Performance Grinder with a Built-in-Vacuum System The Alpha® Ecogrinder is the ideal high performance grinder with a built-in vacuum system. It is designed for continuous production in fabrication shops as well as job sites. The Alpha® Ecogrinder ensures a virtually dust-free environment without the use of an external vacuum system or expensive dust collector. Its unique slide cover allows the Ecogrinder grinding wheel to grind up to the wall.
Alpha® HSG-125 The Ultimate Workhorse for Tile Contractors HAND TOOLS & ACCESSORIES Alpha Professional Tools® introduces the new HSG-125 High-speed Angle Grinder. This 5” grinder has a powerful 7.2 Amp (800W) motor with 9,700 rpm. The HSG-125 is equipped with a standard 5/8”-11 spindle and two sets of flange/lock nut sets (7/8” and 20mm arbors) in order to accommodate 4”, 4-1/2” and 5” diameter blades. The Alpha® HSG-125 is versatile and can be used wet or dry.
Alpha® WDP-120 HAND TOOLS & ACCESSORIES The Ultimate Polisher for Decorative Concrete Contractors *Optional accessory / sold separately FLEXIBLE CONNECTOR HOSE The ultimate Polisher for Decorative Concrete Contractors. Introducing the Alpha® WDP-120, a Wet/ Dry Variable Speed Surface Polisher designed for all decorative concrete applications, including edge polishing. This Hybrid Polisher provides the best quality polish on concrete countertop surfaces when used with water.
Alpha® VSP-120 HAND TOOLS & ACCESSORIES Variable Speed Wet Polisher Alpha® has improved the popular VSP wet polisher series with new features to perform above and beyond your expectations! The new VSP-120 comes with variable speed control switch with an automatic speed feed-back system to maintain consistent RPMs with or without a load. This switch has also expanded the usable RPM range from 500 RPM to 2,800 RPM.
Alpha® AWP-158 HAND TOOLS & ACCESSORIES Portable Electric Polisher The new generation of electric wet polishers, the AWP-158, is designed for polishing, shaping, core drilling and light grinding. This 7.8 amp, 800-watt, 3,000 RPM machine is a powerful workhorse suitable for use in the shop or on the job site. The AWP-158 features several improvements over previous generations of polishers.
Alpha® AIR-300 New Generation of Air Polisher for Fabricators HAND TOOLS & ACCESSORIES The Alpha® AIR-300, designed for unique applications that are difficult to accomplish using conventional polishers. A smaller version of the well-known Alpha® AIR-658, the AIR-300 is ergonomically designed to fit comfortably in your hand and only weighs 1.6 pounds reducing fatigue from long hours of polishing. The smaller design is easy to maneuver and produces flawless sink rims and bowls.
Alpha® AIR-658 HAND TOOLS & ACCESSORIES A High Performance Pneumatic Polishing Tool Alpha AIR-658 is a high performance, pneumatic polishing tool designed for continuous production use. It has a centrally water-fed distribution system that provides the best finishes possible. For years, Alpha Professional Tools® produced model number AIR558, which was known for its high quality and durable construction.
Alpha® Backer Pads ACCESSORIES Alpha® Rigid Backer Pads eliminates the wavy finish by keeping the Ceramica flat to the polished surface. Fabricators and tile contractors use it with good results, restoration workers find that the rigidness of the pad RIGID BACKER PAD enables them to work in small areas such as corners or staircases.
Alpha® Ecocaddy ACCESSORIES Stand-up Grinder Caddy for the Ecogrinder The Alpha® Ecogrinder Caddies allow the operator to stand and not have to work on their knees when grinding and sanding concrete, terrazzo and masonry products or doing surface preparation work. The height adjustment mechanism allows the caddy to be adjusted to accommodate individual users. The unit is available in two versions for both Ecogrinders (110V and 220V).
Dry Tile Bullnose Kit Create A Factory Finish Without The Mess ACCESSORIES The Alpha® Dry Tile Bullnose Kit was designed to create a bullnose edge on tile or stone and polish it to a factory quality finish with a few simple hand-held tools without the mess of dust or water.
Alpha® Ecoguard Type M ACCESSORIES High-Speed Angle Grinder Solution for Cutting Metal Introducing the Ecoguard Type M a.k.a. Spark Buster for making it possible to utilize a high-speed angle grinder for metal cutting applications. When equipped with a Carbide-tipped blade, the Ecoguard Type M eliminates the dangerous kick-back on hand-held grinders as well as minimizes sparks, debris and odor.
Alpha® Ecoguard Type G ACCESSORIES For Grinding Applications Alpha® introduces a new Ecoguard designed for collecting dust when using the Alpha® HSG-125 or other High-Speed Angle Grinders. The Ecoguard Type G is intended for use when grinding with wheels up to 5” in diameter. It is made of high-quality construction for heavy-duty applications. This dust collection cover creates a virtually dust-free environment when connected to a vacuum.
Alpha® Ecoguard Type C ACCESSORIES A Hybrid Dust Collection Cover For Cutting Applications Alpha® introduces the new Ecoguard, designed for collecting dust when using our High-Speed Angle Grinder. The Ecoguard Type C is for used when cutting with dry blades up to 5” in diameter. It is made of high-quality construction for heavy-duty applications. This hybrid dust collection cover eliminates the mess and can be used with or without a vacuum! PART NO.
Alpha® Ecoguard Type W ACCESSORIES Dust Collection Cover for Wider Blades Alpha® has expanded its Ecoguard line for cutting applications to include a dust collection cover for wider blades. Introducing the Ecoguard Type W.
ACCESSORIES Alpha® HEPA Dry Vacuum 10-Gal (DRY USE ONLY!) Certified HEPA Vacuum Equipped with a powerful 2-hp motor and an extra large capacity HEPA filter system, the HEPADV10 Dry Vacuum offers the air flow efficiency of vacuums costing three times as much. The certified HEPADV10 is manufactured to the same high quality standards as you expect from Alpha®. It includes a high-efficiency ‘Drop-in’ style HEPA filter individually certified to have a minimum efficiency of 99.97% at .
Alpha® Apron ACCESSORIES Flexible, Convenient and Waterproof Want to be the sharpest tool in the box? Wear the new Alpha® Apron! This trendy design is not only fashionable, it will also protect and keep you dry. Made of a strong vinyl material, the Alpha® Apron is lightweight, durable, comfortable and easy to wear. A flexible waistband keeps it in place (no strings or knots to tie). It can be used by anyone polishing with water or to keep the dust associated with dry polishing off your clothing.
Alpha® 4-Step Concrete Polishing System HAND POLISHING SYSTEM Creates a Flat Smooth Surface Without the Waves Alpha® has developed a new series of polishing discs specifically designed for polishing concrete countertops. The Alpha® 4-Step Concrete Polishing System includes 4 SemiFlexible Discs. Each disc is laminated with rubber and equipped with the Variable Drive System for better control during polishing.
Alpha® Wet/Dry Concrete Polishing System HAND POLISHING SYSTEM Concrete Polishing Wet/Dry and by High/Low RPMs Alpha® introduces the universal concrete surface polishing system for concrete contractors who work on decorative surfaces. This system creates a superior surface polish on concrete whether you are using them wet or dry and by high or low rpms. The WDC Series is available in grits of 60, 150, 300, 500, 1000, 2000 & 3000.
Alpha® Ceramica Dry HAND POLISHING SYSTEM Dry Polishing for all Natural Stones and Cement Based Composites Alpha® has expanded its line of polishing pads to now include a dry version of the superior Ceramica Resin. These new pads utilize a new process to make the diamond layer thicker, thus creating better quality results and a longer life than typical dry resin pads. Ceramica Dry is perfect for all natural stones and cement-based composites such as concrete and terrazzo.
Alpha® Ceramica Edge HAND POLISHING SYSTEM Wet Polishing for all Natural Stones and Cement Based Composites Alpha® delivered the first flexible diamond polishing discs called Ceramica Polishing System to the US stone industries that made what seemed to be an impossible task possible. Ceramica was adapted in the monument fabrication shop first to achieve the highest degree of polish with ease that lasts for generations which became the standard.
Alpha® Ceramica EX HAND POLISHING SYSTEM Wet Polishing - All Stones Alpha®, the manufacturer of the “Original Ceramica Polishing Discs”, has created the next generation of polishing discs, Ceramica EX. With the proliferation of engineered stones, Alpha® recognized the need for polishing discs that could work effectively on these challenging new surfacing products.
Alpha® Sandpaper HAND POLISHING SYSTEM Inexpensive Alternative Solution for Polishing Stone and Concrete Alpha® Sandpaper discs consist of a waterproof hook and loop backed material combined with a silicon carbide abrasive, which is the perfect combination for use on concrete, marbles and softer types of natural stone. Marble fabricators find Alpha® Sandpaper to be effective and durable. Tile contractors find Alpha® Sandpaper to be very adaptable to onsite work and easy to use.
HAND POLISHING SYSTEM Alpha® Diamond Hand Pads Versatile Hand Finishing Tool Alpha® Diamond Hand Pads are used to perform convenient, on-site polishing, on materials such as glass, ceramics, marble, granite, concrete, terrazzo and quartz surfaces. This system is available in two bond types to provide the best possible finish. *May be used for wet or dry applications.
Alpha® Stain Removers RESTORATION & MAINTENANCE RSR-2000 Alpha Professional Tools® leads the way with an innovative product designed to quickly remove common rust stains from natural stone surfaces or other types of material such as concrete, brick, terra cotta, Mexican tile, or other hard porous surfaces. This unique product comes as a pre-mixed gel in 14‑ounce tubes and is easily applied to rust stained areas.
Alpha® Moisture Test Kit Starter Package RESTORATION & MAINTENANCE Moisture Test Kit for Calculating Vapor Emissions Alpha® has recognized the growing concerns of floor covering industry professionals which involves the condition of the subfloor and most specifically, the “invisible” moisture emission and its effect on the finished layer. The Alpha® solution for this is the “Moisture Test Starter Package”.
Alpha® Moisture Test Kit RESTORATION & MAINTENANCE Step by Step Instructions Step 1 Use Alpha® Ecogrinder (with dust carriage attached) to remove any foreign objects and dust from the concrete surface to insure proper adhesion of the sealant. Strictly follow guidelines given by Occupational Safety & Health Administration (OSHA). STEP 2 Weigh the container with the vinyl tape seal at the test location immediately prior to initiating the test (W1).
Alpha® Kits The Alpha® has created a series of specialized kits to provide the installer with a great selection of fabrication tools to efficiently customize project installations. PART NO. 5480-7350 Pre-Fabricated Granite Starter Kit PART NO.
Index A G Accessories Dust Bag Carriage 23 AIR-300 20 AIR-658 21 Apron 30 AWP-158 19 Grinding Wheels Vexcel 11 Spike 12 Vextra 13 Vflex 14 Groove Cutter 6 B Backer Pads Flexible 22 GV 22 Rigid 22 H HSG-125 16 P C Ceramica Dry 33 Edge 34 EX 35 Profiler B-Series 7 R RSR-2000 38 D Diamond Hand Pads 37 Drilling Wet Core Bits 10 Dry Core Bits 10 Dry Tile Bullnose Kit 24 Dust Bag Carriage 23 S Safety Glasses 30 Sandpaper 36 Stain Removers 38, U E Ecogrinder 15 Segmented Grinding Cup Wheel 15 Ecoguards
Catalogs and Booklets Alpha® has organized its product catalogs to best serve the needs of our customers. We offer catalogs for Hand Tooling applications, Concrete appplications and specialized booklets for fabricating crystallized glass, thin-panels, pre-fabricated granite blanks and metal applications. To request these catalogs, or for more information about our product line, visit our website or contact us at 800-648-7229.
