Specifications

7
Seamless switching between video and
PC sources
In live events, there’s no telling what types of
signal sources need to be presented or
distributed. With the Anycast Station system
this dilemma is a thing of the past. The Anycast
Station system allows live switching between a
variety of signal sources – from standard
definition video (Analog composite, S-Video,
DV, SDI) to PC images with various
resolutions. Two important features make this
possible – the sophisticated built-in line
converters and the high-resolution internal
processing. Each input source supplied to the
Anycast Station system is up-converted and
processed within a 1280 x 1024 progressive
domain to allow switching between sources of
different resolutions, while keeping picture
degradation to a minimum. The program can
be output from a variety of interfaces including
Analog composite, S-Video, and SDI for video,
and D-Sub 15-pin outputs for projectors and
Plasma displays.
Flexible video input configurations
As standard, the Anycast Station system offers
the following video and PC inputs. These are
provided as interface modules installed in the
slots of its rear panel.
Primary inputs 1 to 4: Analog composite,
S-Video, DV
Primary inputs 5 to 6: RGB (XGA, SXGA)
Should a different input configuration be
required, the interface modules such as
BKAW-580 for SDI input and output are
provided as optional accessories, allowing users
to configure the system exactly as required.
What’s more, the Anycast Station system allows
each input on these modules to be assigned to
any one of the primary inputs via simple menu
settings.
Primary Inputs
Video
Computer RGB
(XGA/SXGA)
Video
Internal Process PGM Outputs
Composite
Y/C
DV Input
SDI
*
(
*
optional)
SDI
*
(
*
optional)
Composite
Y/C
DV
Computer RGB
(XGA/SXGA)
Up
Converter
Down
Converter
Up
Converter
Down
Converter
Switching
(1280x1024 pixel)
Rear Panel Connectors
Left Side Panel Connectors