Data Sheet

Product Specification Sheet APS009 - Rev. 09/2013
AP777 and AP777B Steel Adapter Plate (painted White)AP777 and AP777B Steel Adapter Plate (painted White)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2015 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
AP777 Adapter Plate Shown
Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications
The adapter plate(s) shall be Alpha Communications® Model AP777
(or AP777B) or approved equal and shall be large enough to cover
the area occupied by the previous intercom unit. The adapter
plate shall be made of 22 gauge cold-rolled steel, painted in a
White powder coat paint finish. The adapter plate(s) shall be
punched to cover the existing back box, and for the apartment
intercom (or videointercom) station to be mounted onto the
adapter plate(s). If required, contractor shall paint the adapter
plate(s) to match the existing wall finish.
Important NoteImportant Note
Since these adapter plates can be used with a variety of stations
and devices, we cannot guarantee a color match between the
stations and these adapter plates!
AP777 and AP777B Adapter PlatesAP777 and AP777B Adapter Plates
The Alpha Communications ® AP777 and AP777B adapter plate s are
de signed specifically to cover existing over-sized apartment inte rcom
back boxes and othe r existing wall ope nings.
Once the adapter plate is affixe d to the w a ll, you can ins tall your
open-voice or handset a pa rtment intercom station or surface mount
vide o-intercom station dire ctly onto the adapter plate.
The model AP777 fe atures tw o (2) mounting hole s 10.50" (267mm) on-
center, top-to-bottom, to ena ble you to ea sily mount the pla te over an
existing 777 series flush back box. In addition, the model AP777 also
features a large (ce nter) hole for w ire access and four (4) pre-punched
holes for mounting common apt. inte rcom stations and handsets .
Ins talla tion is quick, ea sy, attra ctive and eliminate s the ne ed for
plaste ring and pa inting ove r the existing hole .
Mode l AP777B is the same as the AP777, e xce pt there are no
mounting holes on the fro nt of the faceplate . This e na ble s you to
punch or drill any special ho les yo u may ne ed, or to lea ve the
faceplate tota lly blank.
Custom-size d adapter plates are also a va ilable in aluminum, sta inless
steel, polished bra ss, or other painted finishes. Plea se send a de taile d
sketch to our sa les dept., along with the qua ntity nee ded, for a
pro mpt quo tation.
FeaturesFeatures
Heavy Duty 22 Gauge Cold-Rolled Steel Faceplate
Easy Installation with pre-punched holes
Decorator White Color
High Quality Powder Coat Painted Finish
Rugged and Good-Looking
Large size neatly covers existing wall openings
Works with a variety of apartment intercom and video
intercom stations and handsets
Options / ComponenetsOptions / Componenets
Dimensions: 5.50"W (140mm) x 12.50"H (318mm) x
0.188"D (5mm).
Construction:
Steel faceplate with White powder coat
paint finish
Center Hole:
1.00" diameter (25mm) round hole for wire.
(No holes in faceplate of model AP777B).