Service manual

Page 4 AM-7000 Service Manual
Rev. A00
Figure 4: Static Protection Wrist Strap
HARDWARE CONFIGURABLE OPTIONS
The following sections summarize the configuration options available to let you tailor your hardware to
your needs. Most of these options require access to the main circuit boards inside the computer, and
should be performed only by qualified technical personnel. Contact your VAR if you need assistance.
Printed Circuit Board Configuration
The next few sections contain configuration information for the following boards:
AM-319-20
The AM-319-20 system board is used with the AM-176-10 board in the AM-7000. The AM-319-20
board supports all the I/O ports used to communicate with printers, terminals, etc. The board also
contains your computer's SSD chip and other I/O related circuitry.
AM-176-10
The AM-176-10 board contains a 68060 CPU chip, one 68-pin Wide SCSI connector, one boot PROM, a
high-performance 100BaseT Ethernet interface, and all of your computer's on-board memory.