Specifications

8
Miles Supply
Polishing Products
Barre, VT
8003968049
Montrose, PA
8882788383
Elberton, GA
8882835863
Rockville, MN
8007890815
Spiralcool
®
Backing Pads
Miles Supply is proud to carry the
Spiralcool
®
Backing pads, which
are recommended for use with
all Resin Fiber discs. The pads
give maximum support to
the disc while the Spiralcool
®
design increases air ow be-
tween disc and pad. Standard size
is 7” diameter by 5/8”-11 thread.
Cloth Backed Sanding Discs
These popular 7” cloth backed sand-
ing discs can be used either wet or dry.
Designed for getting into hard to reach
places for surface polishing.
Grit sizes available include 80, 120, 180, 220, 320,
and 600.
Alpha Twistouch Turbo Discs
Miles Supply oers these 3” discs which provide a safer and
easier method for at granite polishing. 6 grits and two buers
take advantage of the twist and lock system to speed up disc
changing and ensure a good hold onto backer pad. Sold individually
in grits of 100, 200, 500, 1000, 2000, 3000, white buer and black buer.
Miles Supply Diamond Discs
Sizes Available: 3”, 4”, 5”, and 7”. These diamond discs deliver ex-
cellent quality at an economical price. Available in eight dierent grits:
#50, 100, 200, 400, 800, 1500, 3000, and Bu.
5mm thick 5” Top Polishing Diamond Pads
The newest way to polish both at and serp tops on your top
polisher. These discs range from 50 to 3000 and will save time
and money compared to conventional methods. Currently only
available in 5” diameter. Velcro backed for easy removal.
Alpha Diamond Discs
Sizes Available: 3”, 4”, and 5”. Alpha discs oer many dif-
ferent types of matrix to suit the job at hand. Alpha oers the
following grit sizes: #60, 150, 300, 500, 1000, 2000, 3000, and Bu.
Felt Buers
High quality solid felt in
diameters of 3” up to 20”
with options of density
also available. Best used
with tin oxide (sold on
the following page).
CoCo Mats
Miles Supply carries this widely used mat for contoured polish-
ing. The sizes of coco mats range from 4” to 15” and are approxi-
mately 2” thick. Best used with tin oxide (see page 9).