Data Sheet

Product Specification Sheet APS713 - Rev. 07/2013
AEDSMP Door Station (Speaker Phone) for AlphaEntry™Master Station
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS712) Next (APS714) >
Shown in Horizontal Mounting Configuration
Architects' And Engineers'
Specifications
The AlphaEntry™ Door Station(s) speaker phone
shall be Alpha Communications® AlphaEntry™
AEDSMP (or AEDSMP-EWP with Enhanced
Weather Protection) or equivalent. The AEDSMP
(or AEDSMP-EWP) shall be used in conjunction
with the AlphaEntry™ touchscreen lobby (entry)
master station(s), when connection to a
telephone line is required for speakerphone
capabilities, or by itself as a stand-alone
communication station.
The AEDSMP (or AEDSMP-EWP) shall be
mounted horizontally (or vertically) and shall
feature a Light Grey colored impact resistant UV
stable plastic exterior with enamel coated PCB.
Unit shall be telephone line powered and shall
have positive screw terminal connectors on
the rear. Unit shall have individual speaker and
microphone volume controls and programmable
VOX switching speed, as required.
Contractor shall observe all local and national
electrical and building codes.
AEDSMP / AEDSMP-EWP AlphaEntry™ Door Stations
The Alpha Communications® AEDSMP and AEDSMPEWP) AlphaEntry™ AlphaEntry™
Door Stations are designed to be used with the AlphaEntry™ touchscreen master
stations (such as model# KPVM-I-17 and KPVM-O-17) or others, to enable open
voice speakerphone capabilities at that station. Typically this is used when
the AlphaEntry™ system is being used as a telephone-entry type system (or similar).
The AEDSMP (or AEDSMP-EWP) mounts behind the faceplate of the AlphaEntry™
touchscreen master station, and connects to the telephone line, by means of
some additional AlphaEntry™ hardware components.
The AEDSMP / AEDSMP-EWP is a line-powered speaker phone designed to provide
two-way voice communications. It can be mounted horizontally (as shown herein)
or vertically, depending upon space restrictions and availability. The AEDSMP-EWP
version offers Enhanced Weather Protection for special environments.
Features
Telephone line powered
Adjustable microphone and speaker volume
Programmable VOX (mic/speaker) switching speed
Weather resistant features: mylar speaker, gaskets, UV stable exterior, enamel
coated PCB (both models)
Intelligent call progress detection for automatic hang-up on CPC, silence, busy
signal, or time out
Standard Environment: (AEDSMP) -26° C to 54° C (-15° F to 130° F) with 5%
to 95% non-condensing humidity (or EWP Environment: (AEDSMP-EWP) with up
to 100% non-condensing humidity
Specifications
Dimensions:
Height: 4.50" (115mm)
Width: 5.50" (140mm)
Depth: 1.50" (39mm)
Construction:
Light grey colored, impact resistant, U.V. stable, plastic
chassis
Connections:
Positive screw terminal connectors or (2) gelfilled butt
connectors (on EWP model)
Mounting: Mounted behind panel faceplate or Surface
Speaker Volume: Approx. 70db maximum @ 1meter
Ring Voltage: 25V AC RMS minimum