Specifications

1
DOCNUMBER 9500
Document Issue 1, Revision 7
June 2009 Page 1–3
Alpha Radio Products Alpha 9500 HF Linear Amplifier Operating Manual
Product Release 1 Introduction
•
Use proper lifting techniques and two people when moving the
ALPHA 9500. The ALPHA 9500 weighs approximately 69 pounds
when the transformer is installed.
•
Although the ALPHA 9500 meets international safety standards and
FCC regulations, remember that the equipment works with high
voltages that can be LETHAL!
This operating manual holds information, cautions, and warnings that you
must follow to ensure safe installation and operation. Read Chapter 1
before attempting to unpack or operate the ALPHA 9500. Failure to
perform procedures properly may result in amplifier damage, fire hazard,
or electric shock.
It is particularly important that you:
•
Never open the amplifier case without unplugging the unit from the
wall outlet.
•
Never stick objects into holes in the case.
•
Never touch an antenna during transmission.
•
Never attempt to turn on the amplifier without the cover securely in
place (all attachment screws reinserted).
•
Never turn the amplifier back on after a hard fault without waiting at
least 20 seconds.
•
Never press the ON (AMP) button after the amplifier faults to power
off.
•
Never allow liquids to enter the amplifier through the cover holes.
•
Never cover or obscure the exhaust holes in the cover of the amp.
1.4 Related Products
Other Alpha products available to enhance your use of the ALPHA 9500
include:
•
ALPHA 2100 full-1500 W-rated 50-ohm dummy loads
•
ALPHA 4500 series SWR meters and wattmeters
For more information, go to www.alpharadioproducts.com or call 303-
473-9232.